Results 1 to 4 of 4
  1. #1
    Active Member
    Join Date
    Nov 2014
    Location
    Hudson Valley, New York
    Posts
    93
    Spyder Garage
    0

    Default Buzzing in front fender.

    I happened to hit one of the fenders with my leg in the garage and I heard a buzzing noise. Only on the one side. After poking around it looks like the rear red reflector is what's making the noise. Is there an easy way to pop this out so I can run a bead of silicone under it? I'd rather not have the silicone show.

  2. #2
    Very Active Member
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    Do you have a 2014 or newer RT? If so, you will need to remove the wheel and remove the fasteners to get at it. They use speed nuts on plastic studs to hold the reflectors in place and those can work their way loose. You might want to stick a piece of double sided tape under the reflector then use the caulk.
    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  3. #3
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    Sometimes, with a bit of luck... you can use a small socket to push down on the fastener, and get it to re-seat.
    (Support it from the reflector side...)
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  4. #4
    Active Member
    Join Date
    Nov 2014
    Location
    Hudson Valley, New York
    Posts
    93
    Spyder Garage
    0

    Default

    Thanks guys. I hope to check it out this weekend.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •