-
Very Active Member
The Krikit...what should it read?
I ordered a Krikit from Ron and I'll probably have it mid week. I searched for belt tension readings, but everything I found was old and didn't really provide an answer. From what I gather I should shoot for a reading of around 180-200 on the Krikit, with the wheel ON THE GROUND on my 2010 RT....Does that sound about right? The bike is running nice and smooth/quiet right now, after I tightened it a couple weeks ago, but I worry the belt might be too tight now adding undue stress to the bearings, so, I wanna check it to be sure. I figure for $20, it's a no-brainer.
Thanks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|