saddle bags

[Allensr]

I just had a set of Can Am bags installed on my 2014 STS by a dealer. I did not want the color panels. There are holes on the lid where ,I think, the panels would be screwed onto the lid. Did the dealer miss plugging the holes or is there a piece missing.
Any thoughts on how to deal with these holes. If left open water will go directly into the bags.
Tks Allen

[Bfromla]

Prolly best to get panel. All other seals will be ugly & need constant checking/upkeep.
If anything seal from inside out (most effictive seals) with a silicon. But clean with alcohol(through & around)first. Might get away with covering uglyness with decals¿ just a thought.

[Allensr]

well it appears as if the cost of the bags do not include the cover panels. asking dealer to see if they can get them sent to me. awaiting their answer.

[Allensr]

Dealer has told me panels are on order and will be dropped shipped to me.
All is well with the world,or will be once I RECEIVE THEM.
ALLEN

[Bfromla]

Congrats you will be happier & coridnated . Is good thig , fyi i wanted to get the BRP top case but they wont offer color mstch or key match & still wand $$$$! So i have found better & cheaper solutions& covered up their logos

[Bob Denman]

Did the dealer offer any explanation as to why those holes were never plugged?

[Allensr]

the holes are for the screws that hold the panel in place. why it was not known that i had to order the panel when i ordered the bags is another question.
Allen

[Allensr]

panels arrived today. all seven screws installed. everything looks good. It did cost an additional $135
Allen

[Bfromla]

& now for a top case