F3 fog light

[rditsch]

After 8500 miles the factory fog light has stop working.
Does any one know the replacement lamp?

[SpyderAnn01]

Have you tried looking at the parts list on the www.can-am.brp.com website http://can-am.brp.com/spyder/genuine...ine-parts.html

[jcthorne]

After 8500 miles the factory fog light has stop working.
Does any one know the replacement lamp?

They are standard H3 halogen lamps. You can pick them up at any auto parts or even wal mart.

[rditsch]

Thanks for the information. I went ahead and opened it up and found out that you are correct. Details on the BRP website omits the bulb detail. It is an Osram 64151 55 watt bulb. I used the Sylvania model. ImageUploadedByTapatalk1440981271.158641.jpgImageUploadedByTapatalk1440981281.359421.jpgImageUploadedByTapatalk1440981290.498803.jpgImageUploadedByTapatalk1440981298.585083.jpgImageUploadedByTapatalk1440981308.323868.jpg

You do not need to disassemble as far as I did. There is a latch with a hinge to remove the bulb. No screws will need to be removed. The positive wire connection can be pulled out without removing the heat shrink and replaced with ease.


Sent from my iPhone using Tapatalk

[Mike,P]

They are standard H3 halogen lamps. You can pick them up at any auto parts or even wal mart.

Would you happen to know the outside diameter of the housing on the fog lamp??? Thx

[rditsch]

Would you happen to know the outside diameter of the housing on the fog lamp??? Thx

The opening is approximately 70mm. The housing enlarges as you get closer to the mount.

[Mike,P]

The opening is approximately 70mm. The housing enlarges as you get closer to the mount.

Thx

[SPYD3R]

FOR WHAT WE PAY FOR THESE BUGGIES, BULBS SHOULD BE FREE FOR LIFE......
i've already replaced the license plate bulb and one rear bulb,,,,, wha'sup'wit'dat.....?
dp