-
SE-5 SHIFTING PROBLEMS
HAS ANYONE ENCOUNTERED PROBLEMS WITH THE SE-5 TRANSMISSION? MY PROBLEM STARTED WITH THE DISPLAY SHOWING A BLINKING 5,4....5,4....5,4 ETC WHEN IN 5TH GEAR. IT WAS INTERMITTENT, BUT PROGRESSIVELY WORSENED TO THE POINT OF ALL GEAR NUMBERS BEING ERRATICALLY DISPLAYED, INCLUDING NEUTRAL AND REVERSE!! IT PROGRESSED TO A MECHANICAL PROBLEM OF NOT WANTING TO SHIFT OUT OF 1ST GEAR FROM A STOP AND TAKE OFF. THE FINALE WAS A STALL IN TRAFFIC AND ALTHOUGH I COULD RE-START, THE ENGINE WOULD STALL AS IF IT WERE SHIFTING INTO REVERSE AFTER TRAVELING 5-10 FEET. FORTUNATELY, WHEN I TURNED OFF AND RESTARTED THE SHIFTING PROBLEM CLEARED UP AND I MADE IT HOME.
-
Registered Users
this never happened to me [yet] hope you get it worked out welcome
-
Very Helpful Member
Gear position sensor maybe? I don't own an SE5 but that sounds like what some SE5 owners described when they had shifting problems.
-
Registered Users
The problem has been seen before and there are several threads about it.
It's most likely the gear position sensor failing, though there are other causes.
Hopefully your dealer will be able to sort it out.
A member of the rabble in good standing.
A happy owner of a yellow SE-5.
NMN Risers, Mudflap Lights, Fender Tips, Center Brake Light w/ Triple Play, Throttlemeister, Madstad Robo-brackets, Madstad windshield, CHAD windshield, Canisterectomy, Exhaust wrap.
-
There is a service bulliten for this very problem. Take it to the dealer and let them replace the sensors and update the software.
Happy SE5 Owner!!!
Silver/Black SE5 - Trunk Liner, 1" riser, 12v, Kuryakyn ISO Grips, 5" Kewlmetal Pullback Bars, Kewlmetal Console, Zumo 450, Ipod, Kewlmetal Highway brackets with Wing pegs, Triple Play, Wizard Light LED's, Corbin front/rear saddle with Backrest, Nelson Rigg CL950 Saddlebags with CL800 Tote Bag, CalSci Medium Windshield.
-
Registered Users
Originally Posted by jmorello
HAS ANYONE ENCOUNTERED PROBLEMS WITH THE SE-5 TRANSMISSION? MY PROBLEM STARTED WITH THE DISPLAY SHOWING A BLINKING 5,4....5,4....5,4 ETC WHEN IN 5TH GEAR. IT WAS INTERMITTENT, BUT PROGRESSIVELY WORSENED TO THE POINT OF ALL GEAR NUMBERS BEING ERRATICALLY DISPLAYED, INCLUDING NEUTRAL AND REVERSE!! IT PROGRESSED TO A MECHANICAL PROBLEM OF NOT WANTING TO SHIFT OUT OF 1ST GEAR FROM A STOP AND TAKE OFF. THE FINALE WAS A STALL IN TRAFFIC AND ALTHOUGH I COULD RE-START, THE ENGINE WOULD STALL AS IF IT WERE SHIFTING INTO REVERSE AFTER TRAVELING 5-10 FEET. FORTUNATELY, WHEN I TURNED OFF AND RESTARTED THE SHIFTING PROBLEM CLEARED UP AND I MADE IT HOME.
i was having some shifting probs with my se5 take back to shop and have em check out your gear postion sensor switch they replaced mine and they also replace a spring called a ressort spring this was an upgrade spring, when i got it back it seems to shift much better and smoother shifts no probs since the fix, before fix mine died on me in middle of road and wouldnt start back up it was acting like the battery just died i had to have it towed to shop hope this helps u out Michael
Red SE5 6 spoke rims,1inch riser,Venom Exhaust,Mono Seatcover,NMN Tripleplay Taillights,NMN Fender Tips,NMN Carbon Fiber SE5 990 Handlebar Inserts,Kury ISO Handgrips w/Throttleboss,Kury ISO Footpegs(i hate these things),and a ProPad Gelseat Cushion.
-
My SE is a 2009 and has had nothing but shifting problems. Usually it sticks in first after a stop at a red light. But it has also locked in second, fifth, fourth, neutral, and reverse. I'm new on this board, but have posted some comments on another Spyder site and it seems like a few others have had the same issues. It has been at the dealer twice (it now has 1,800 miles on it) and they can't seem to find the problem. I've ridden motorcycles all my life, and I don't think the problem is with my driving technique. It is at the dealer now, and I really don't want it back until they can solve the problem as it is totally useless to ride.
I have searched the posts on this site and have found that some SE-5 owners have had similar issues, and they have been solved by replacing the gear position sensor and some kind of spring. I'll pass this info on to my dealer.
Thanks, everyone.
-
welcomesorry about your shifting problems
Originally Posted by opticat
My SE is a 2009 and has had nothing but shifting problems. Usually it sticks in first after a stop at a red light. But it has also locked in second, fifth, fourth, neutral, and reverse. I'm new on this board, but have posted some comments on another Spyder site and it seems like a few others have had the same issues. It has been at the dealer twice (it now has 1,800 miles on it) and they can't seem to find the problem. I've ridden motorcycles all my life, and I don't think the problem is with my driving technique. It is at the dealer now, and I really don't want it back until they can solve the problem as it is totally useless to ride.
I have searched the posts on this site and have found that some SE-5 owners have had similar issues, and they have been solved by replacing the gear position sensor and some kind of spring. I'll pass this info on to my dealer.
Thanks, everyone.
-
Active Member
I pick mine up from the dealer today, I had it in for the shifting problem. Like stated below there is a service bulliton on this, mine took a software update and a gear postioning sensor and a spring.
-
Registered Users
I too experienced similar problems to everybodyu with my 08 SE5 stalling or lurching forward at stops. I took it into my dealer back in October and was told that after conversations with BRP that BRP was aware of teh transmission probloems and were working on a solution. They (BRP) also sent my dealer new Clutch Rollers that were installed and seemed to corrcet the problem.
Once I get the bike back on the road in the spring ng I will also pursue the software fix and gear position sensor fix as well.
-
Motorbike Professor
Originally Posted by rleathen
I too experienced similar problems to everybodyu with my 08 SE5 stalling or lurching forward at stops. I took it into my dealer back in October and was told that after conversations with BRP that BRP was aware of teh transmission probloems and were working on a solution. They (BRP) also sent my dealer new Clutch Rollers that were installed and seemed to corrcet the problem.
Once I get the bike back on the road in the spring ng I will also pursue the software fix and gear position sensor fix as well.
The stalling and lurching is a problem with the clutch rollers...usually. False gear indications, stuck in gear, and quitting running altogether, along with some other odd problems sometimes, are a result of the gear sensor and the subject of the service bulletin. If you have no further issues, why press the dealer to fix them?
-Scotty
-
My SE5 has problems shifting too
I have a 2008 SE5 that has had on-going gear shifting problems. The bike will lock into a gear and not respond. I have had to stop, turn it off, let it set for about 10-15 minutes before there is any hope of getting it out of the gear it is stuck in.
It has been at the dealer now for 3 weeks. They called BRP and was first told to replace the shifter switch. They did, and no help. BRP has now sent the dealer two PCM modules that both test bad when installed in my bike. BRP has now told the dealer to replace the sensor in the transmission.
I'll print off this thread and call the dealer tomorrow. If there is a service bulletin on the shifting problems, how come BRP didn't inform the dealer about it? Just wondering.
Sparrow
-
Motorbike Professor
Originally Posted by cj sparrow
I'll print off this thread and call the dealer tomorrow. If there is a service bulletin on the shifting problems, how come BRP didn't inform the dealer about it? Just wondering.
BRP's bulletins are announced and distributed on Bossweb, on the dealer's computer. Real easy to miss one if it is printed in the weekly update. Others are issued separately by the same route. Some dealers don't check this religiously, apparently. Not sure if the is some kind of index or search function for them.
-Scotty
-
Problems shifting out of reverse
The only problem that I have had is shifting out of reverse. at times it will shift into Nutral just fine ...like at the dealership when I go to have it checked. at others I hit the shifter to make the shift and all I get is an "E" on the gear position indicater and the R and the N blink alternately then the message " Check the transmission scrolls across the display as well as the "Check Engine" idiot light comming on. Sometimes just shutting down and restarting will cause it to shift into nutral at others I have to tinke with the shifter to get it to go.
The night that I brough my Spyder home I had a serious problem with it sticking in reverse. I found in the owners manual where you can manually shift the transmission. Just a shift from Reverse to nutral fixed the problem that night.
Later.
-
Registered Users
Originally Posted by jmorello
HAS ANYONE ENCOUNTERED PROBLEMS WITH THE SE-5 TRANSMISSION? MY PROBLEM STARTED WITH THE DISPLAY SHOWING A BLINKING 5,4....5,4....5,4 ETC WHEN IN 5TH GEAR. IT WAS INTERMITTENT, BUT PROGRESSIVELY WORSENED TO THE POINT OF ALL GEAR NUMBERS BEING ERRATICALLY DISPLAYED, INCLUDING NEUTRAL AND REVERSE!! IT PROGRESSED TO A MECHANICAL PROBLEM OF NOT WANTING TO SHIFT OUT OF 1ST GEAR FROM A STOP AND TAKE OFF. THE FINALE WAS A STALL IN TRAFFIC AND ALTHOUGH I COULD RE-START, THE ENGINE WOULD STALL AS IF IT WERE SHIFTING INTO REVERSE AFTER TRAVELING 5-10 FEET. FORTUNATELY, WHEN I TURNED OFF AND RESTARTED THE SHIFTING PROBLEM CLEARED UP AND I MADE IT HOME.
My spyder is at the dealer getting the SE5 update. It started to freeze in 1st when decelerating. Will know if it works when i get it back. There is a service bulletin on this. Just notify the dealer and they should address it under warranty.
Paul
-
Just wondering if the SE 5 reported issues fall within a specific serial number range ..like the last 3-4 numbers in the VIN ??
If so do we have an idea from the dealers, BRP etc. on this site what that range might be ?
NorthRamp
Red SE 5 2009 #686
-
Alignment Specialist
Simple solution, buy the manual...I don't think BRP has the auto figured out yet and the headache might not be worth it.
I read of many problems with the SE5...far more than with the SM5...sure, there are those who have no problems at all, but the frequency of issues appears to be much higher...there are those that will say that we just hear about the problems more on this board, but if all things are equal, we'd hear more about the SM5s as there are likely more of them on the road.
IMHO, get a SM5...more fun anyway with the clutch!
Bone Crusher
If you work to make money, you'll never be happy, as there's never enough money...if you work to take good care of people, the money will always be there....Sean O'Connell, 1999
-
Motorbike Professor
Originally Posted by northramp
Just wondering if the SE 5 reported issues fall within a specific serial number range ..like the last 3-4 numbers in the VIN ??
If so do we have an idea from the dealers, BRP etc. on this site what that range might be ?
NorthRamp
Red SE 5 2009 #686
If there is a warranty issue addressed in a service bulletin, that bulletin should list the machines affected. The numbers are listed by model, with serial number ranges beneath each model. The model designation of your Spyder is shown on the VIN plate on the swing arm, and on your warranty registration, and probably nowhere else. There are many models. Go figure?
Unfortunately, the service bulletins are not published by BRP, although some have shown up on line or in service manual discs. Have your dealer pull the paper copy of the bulletin, and look up the serial number by model. Even then, these are not blanket recalls. Your Spyder must exhibit the symptoms of the problem, often including the proper diagnostics, before it will be addressed.
-Scotty
-
Registered Users
Originally Posted by jmorello
HAS ANYONE ENCOUNTERED PROBLEMS WITH THE SE-5 TRANSMISSION? MY PROBLEM STARTED WITH THE DISPLAY SHOWING A BLINKING 5,4....5,4....5,4 ETC WHEN IN 5TH GEAR. IT WAS INTERMITTENT, BUT PROGRESSIVELY WORSENED TO THE POINT OF ALL GEAR NUMBERS BEING ERRATICALLY DISPLAYED, INCLUDING NEUTRAL AND REVERSE!! IT PROGRESSED TO A MECHANICAL PROBLEM OF NOT WANTING TO SHIFT OUT OF 1ST GEAR FROM A STOP AND TAKE OFF. THE FINALE WAS A STALL IN TRAFFIC AND ALTHOUGH I COULD RE-START, THE ENGINE WOULD STALL AS IF IT WERE SHIFTING INTO REVERSE AFTER TRAVELING 5-10 FEET. FORTUNATELY, WHEN I TURNED OFF AND RESTARTED THE SHIFTING PROBLEM CLEARED UP AND I MADE IT HOME.
I have the same problem with transmission. Blinking display when i drive in 5th gear.... 5-4, 5-4, 5-4....I called dealer today and they say to me that software update will help. I think that dealer must replace gear position sensor....what do u think? Thank you
Happy Owner
-
Originally Posted by igor
I have the same problem with transmission. Blinking display when i drive in 5th gear.... 5-4, 5-4, 5-4....I called dealer today and they say to me that software update will help. I think that dealer must replace gear position sensor....what do u think? Thank you
Should be Gear Position Sensor, Spring and software upgrade. I would have them do all of it at once.
Happy SE5 Owner!!!
Silver/Black SE5 - Trunk Liner, 1" riser, 12v, Kuryakyn ISO Grips, 5" Kewlmetal Pullback Bars, Kewlmetal Console, Zumo 450, Ipod, Kewlmetal Highway brackets with Wing pegs, Triple Play, Wizard Light LED's, Corbin front/rear saddle with Backrest, Nelson Rigg CL950 Saddlebags with CL800 Tote Bag, CalSci Medium Windshield.
-
Originally Posted by igor
I have the same problem with transmission. Blinking display when i drive in 5th gear.... 5-4, 5-4, 5-4....I called dealer today and they say to me that software update will help. I think that dealer must replace gear position sensor....what do u think? Thank you
it is better they do the bulletin complete from a-z the spring increases oil pressure to aid shifting and the gbps sensor reads more acurately and reduces electrical issues, the program also helps
-
My 09 SE 5 continues to be down , going on the fifth week at the dealer.
Gear position sensor, spring and download all completed. Oil pressure within limits.
Still sticks in gear and doesn t up or downshift. BRP aware and investigating problem .
I still Love my SE 5 .
Northramp
-
Originally Posted by northramp
My 09 SE 5 continues to be down , going on the fifth week at the dealer.
Gear position sensor, spring and download all completed. Oil pressure within limits.
Still sticks in gear and doesn t up or downshift. BRP aware and investigating problem .
I still Love my SE 5 .
Northramp
i hope by now they are aware and are doing something about it....when i talked to brp cust service, they told me they werent aware of any problems
-
Registered Users
Had the TSB upgrade last week on my SE5 and the bike runs excellent now. Covered under warranty. BRP should have recalled the units but at least they fix works when requested.
-
Help me here. What is the TSB upgrade?
I still love my SE 5. It s such a great ride , i have missed it so much in the last weeks.
Northramp
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|