-
ISCI Handbake
Originally Posted by HotRodLincoln
So whats that shake out to? $1200?
$1300
-
ISCI Handbrake for the F3
Originally Posted by Bootie
I just ordered the ISCI Handbrake directly from ISCI. They have a 20% off sale on right now. Now may be a good time to buy.
I had their brake on my 2010 RT and I simply cannot get used to driving without one. They say the installation is easier on the
F3 than on the RT.
I just finished installing my ISCI handbrake on my F3. The installation went well and was not very difficult. Bleeding the system was no big problem.
ISCI, as usual, did a fantastic engineering job on this kit. For me, it is well worth the $1300.
Oh, and I have the BRP floorboards and they posed no problem, at all.
Only problem I did have was a result of pinching the wires on the handlebar with the mounting hardware. The electrical system went berserk. ISCI's instructions even warned about this. My problem was that I had had heated grips installed at the dealer and this resulted in some extra wires for which there was no room in the mounting hardware. Once I found and corrected the pinched wire(s) the problem went away. Ultimately I had to grind some extra space in the right-side switch housing so I could re-route the wires. This was the most time consuming task of the day.
But, as they say, "All's well that ends well" and I LOVE having that hand brake again (I had one on my 2010 RT, too). It SUCKS that BRP doesn't offer this as an option.
-
ISCI handbrake
I to need the ISCI handbrake. Should I put it on the left or right side? Would it be a hassle with the gas throttle on the right with it?
Anybody done this?
-
Originally Posted by TommySnake
I to need the ISCI handbrake. Should I put it on the left or right side? Would it be a hassle with the gas throttle on the right with it?
Anybody done this?
Right Side Tommy, you won't be needing throttle when braking, all 2 wheel MC's have the front brake lever on the RIGHT!
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button"
If in Doubt, Don't Do It!
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
-
SpyderLovers Sponsor
Originally Posted by rjs
Hello everyone I ordered my F3s in Febuary I traded in my 2013 St limited on April 29th my st had the ISCI handbrake which is a must have for me due to being a Para (paralyzed from the waist down)I have been contacting ISCI
and inquiring about the handbrake at least monthly, the latest is not until
September. any one else WAITING?
Ric
Motorcycle Dave's LOGO #1.jpg
Hi Ric
I stock the hand brakes for all CanAm Spyder models, ISCI Hand Brake.jpgIf you look above you will see I am one of the sponsors of this site
I am a brick and mortar shop as well as an on line accessories dealer / distributor. I sell EVERYTHING on line for less than anyone
because on line I am not installing so I can sell for much less than everyone else. If you notice when you look at my website there
are NO prices here because the Mfg. will not allow listing prices lower than their MAP pricing.
Simply Give me a call 209-887-3283 9:00AM to 8:00PM 7 days a week I will be happy to give you the Spyder Lovers Member price.
Motorcycle Dave's LOGO #1.jpg
-
Ozzie Ozzie Ozzie
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|