$6.00 Waterproof Dual USB Charger

[mastertek2000]

so i had a old gauge from my 2013 i was not going use so i wanted to do a Dual USB Charger
took the old gauge apart drilled a hole in added wires presto

you see people selling this same dual UBS for 20-30 bucks
http://www.ebay.com/itm/12V-Waterpro...item3aa85053e6

[DrewNJ]

Nice work!

[fratzba]

Nice pics!

Did you have to put some sort of washer or bushing around it? I haven't been able to find one that actually fits in the gauge holes on my '15 RTS. I'm about to create a pair of washers, as my USB jacks are a lot smaller than the holes in the dash.

-Fratz

[mastertek2000]

Nice pics!

Did you have to put some sort of washer or bushing around it? I haven't been able to find one that actually fits in the gauge holes on my '15 RTS. I'm about to create a pair of washers, as my USB jacks are a lot smaller than the holes in the dash.

-Fratz

you could even use the factory gauge if you wanted i did put the back of the gauge back on it and use the retainer clip that came with it i will post a pic

[finless]

FYI if you do not want to destroy a gauge you can get 2" blanks pretty cheap. All kinds of styles and colors.

Example Ebay search:

http://www.ebay.com/sch/i.html?_from...+2%22&_sacat=0

I used this one as it mounts the same way the BRP gauge does.

http://www.ebay.com/itm/BOAT-SST-GAU...40d572&vxp=mtr


Bob

[mastertek2000]

FYI if you do not want to destroy a gauge you can get 2" blanks pretty cheap. All kinds of styles and colors.

Example Ebay search:

http://www.ebay.com/sch/i.html?_from...+2%22&_sacat=0

I used this one as it mounts the same way the BRP gauge does.

http://www.ebay.com/itm/BOAT-SST-GAU...40d572&vxp=mtr


Bob

thanks for the info bob in my case i had a old one