Temporary paint/coating.

[Stranger1759]

So, I'm not a big fan of chrome so I thought I would give this a try.
I couldn't find any threads on this product, Dupli-Color makes a product called CustomWrap removable coating.
I used the Matte Carbon Black.
It's a lot like Plasti-Dip I think.
I can peel it off or touch up when ever I like.

[Deer Slayer]

You may be on to something. I have seen this product used on car rims on tv. They said it would hold up for 6 months or more. Yours looks good.

[Raknid]

You did good job with that....I like it.

[james danny]

I like this .thanks going to have to try this.

[Dan McNally]

Looks great . . . been debating doing this to my plastic "chrome" parts.

[Stranger1759]

If you don't plan on separating all the pieces, I would get several different sizes of masking tape starting out at about 1/4". All I had was like 1-1/2" blue tape laying around, it worked but since there are very few straight lines it took a lot more effort.
You will also need some degreaser/wax remover.
It simplifies things if you mask off all that you don't want painted. But if you get some over spray on something it cleans off easily.

[Chupaca]

is another. I used a similar one made by Rust-O-leum. We have some ryders that have done the bars and all chrome and grey parts. Works well. Yours turned out great changes the look quite a bit. Congrats...

[Tgwinn]

It's as you said, basically the same as plasti-dip. I love plasti-dip! I have used it on everything from the bumper of my wife's minivan that faded from the sun, to a motorcycle helmet that I wanted to change to bright yellow. Just make sure you use 4-5 coats or else when you peel it off, it will be too thin and be a HUGE pain in the neck to peel off. If its got enough coats and thick enough, it should peel off in one nice and easy sheet. There are several colors of plasti-dip and even the chameleon colors that change color as you walk past them or look at them at different angles.

[vided]

real nice

[JayBros]

Looks very nice with the Cognac color.

[mastertek2000]

i did this last year on my 2013 i found it held up till the bug guts got to it LOL

[tofriendscreek]

I really like your work and the colors are great!!!

[Bob Denman]

I'm like an Old Crow... If it's shiny; I'm gonna pick it up!
But I've got to admit that your solution looks pretty darn nice!

[Rawhide kid]

Agree. Love this idea and will give it a try!


Sent from my iPad using Tapatalk

[coz]

Pretty good stuff. I did all my silver panels last spring. They have held up very well. The whole write up is on the diy board.

[pegasus1300]

So I went to the Dupli Color website and they have several colors including a clear. Oh the possibilities