-
Registered Users
Driver's backrest adjustment?
The driver's backrest doesn't provide any lumbar support for me, as it is tilted too far back...
Does anyone experience the same problem and has come up with a solution?
-
Registered Users
I'm sorry... 😒
I just took the leather cover off...and found a little adjustment screw.
Sometimes one should think before posting!
Well ,maybe it's helpfull for someone out there 😉
-
Very Active Member
Originally Posted by Wippi01
I'm sorry...
I just took the leather cover off...and found a little adjustment screw.
Sometimes one should think before posting!
Well ,maybe it's helpfull for someone out there
what adjustment does it offer ? back - forward or up & down ?
thanks
osm
-
Registered Users
Backwards and forwards...
Now it is absolutely perfect. The backrest cradles my lower back and helps me to sit in a more healthy position ( I realized that I start to slouch while riding and my lower back started aching). AND my wife has got more room sitting in the back which is really important because a grumpy wife in the passenger seat is the worst back pain...Hihihi..get it?
-
Very Active Member
i returned my back rest because i never knew it had a adjustment. i should of checked
NO BIKE AT THIS TIME
-
Active Member
Drivers Backrest
Originally Posted by Wippi01
Backwards and forwards...
Now it is absolutely perfect. The backrest cradles my lower back and helps me to sit in a more healthy position ( I realized that I start to slouch while riding and my lower back started aching). AND my wife has got more room sitting in the back which is really important because a grumpy wife in the passenger seat is the worst back pain...Hihihi..get it?
What model or does it matter, I have the comfort seat and drivers backrest for it, mine pushes me too far forward so would like to back it off a little bit.
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
Registered Users
It is the standard OEM driver's backrest for the F3...
But maybe this also works for other models???
Last edited by Wippi01; 07-03-2015 at 04:17 PM.
-
The tilt adjustment bolt is mentioned in the installation instructions.
Rick
-
Originally Posted by stebrock
The tilt adjustment bolt is mentioned in the installation instructions.
Rick
It does pay to read the instructions.
-
Registered Users
Originally Posted by RedStar
It does pay to read the instructions.
It was installed when I picked it up...
I didn't get the instructions!
But whatever. I figured it out anyway!
-
Backrest Paperwork
Originally Posted by stebrock
The tilt adjustment bolt is mentioned in the installation instructions.
Rick
Seems like you have to stand on your head with the dealers to get your installation paperwork when having them do the labor, must be scared we are going to do it better, huh!
-
Very Active Member
is that adjustment screw only on the F3's or does the OEM backrest for the 2014 RT's have an adjustment as well ?
osm
-
Active Member
2014 RTL
Originally Posted by Orange Spyder Man
is that adjustment screw only on the F3's or does the OEM backrest for the 2014 RT's have an adjustment as well ?
osm
Is there an adjustment for this backrest? I'd pay money for one
-
Very Active Member
It's on my 2014 Ultimate seat and I imagine its on all of them. Common sense would dictate some adjustment as most people's back location is different.
One of the hardest decisions you'll ever face in life is choosing whether to walk away or try harder.
-
Active Member
Drivers Backrest
Originally Posted by pitzerwm
It's on my 2014 Ultimate seat and I imagine its on all of them. Common sense would dictate some adjustment as most people's back location is different.
An ultimate is a completely different seat than OEM stock or comfort seat, I checked my comfort seat and cannot get the zippers for the cover to even move, so left it alone rather than break the zipper.
Greetings from Idaho
2014 RT-S,
Barjaron swaybar, chome luggage rack, Ram Mount GPS, 12 volt dash outlet, spyderflap mudflap, Rivco flag mounts, drink2go and custom handlebar drink holders,Driver Backrest,Tri-Axis Handlebars, TRICLed turn signal lights. Custon Dynamic Magic Strobe Brake Modulator, Triple Dash Pouches, "Squared Away" Laser Alignment, Spyderpops Bumpskid, TricLed "Knightrider" LED
2014 RT , White (Mine) Cognac (wifes)
-
Active Member
Zipper
2014 RT been trying to get the zipper loose on my backrest also. What is the trick?
2014 Spyder RT Limited, Lees-sure Excell camper, Aluma MCTXL Trailer
-
Active Member
Originally Posted by cyclekid58
What model or does it matter, I have the comfort seat and drivers backrest for it, mine pushes me too far forward so would like to back it off a little bit.
The RT's OEM backrest is NOT adjustable. A $22K F3's backrest is adjustable but a $30K RT Limited's is not?? I sit too far forward also with my crotch almost on the glove box. Someone suggested putting some washers as spacers under the seat to tilt the backrest back a little, but the shop told me today they tried to do it and it didn't really seem to make much difference. They said there's some BRP/Can Am something or other internally about the issue, so what that means for us I don't know. Just installed a Baja Ron sway bar and getting ready to try it out.
[/IMG]
2012 RT-S SE5, Pure Magnesium Metallic (traded in)
2015 RT LTD SE6, Red Pearl, Ultra Comfort Seat
MODS: shorty antenna, BajaRon sway bar, Air Hawk cushion, custom LED US flag, custom Sue Hopper painted SPECOPS hood logo, custom Combat Craft Crewman windshield engraving, cup holder, Doc Humphry's 2017 complete RT kit belt tensioner
-
Active Member
Thanks Wipp. I have been considering one but was concerned that it would not hit me right. I'm glad to hear it does. I got my windshield on this weekend, my footboards came in today, sounds like another piece of the puzzle for ultimate comfort.
-
Dealers
Originally Posted by Wippi01
It was installed when I picked it up...
I didn't get the instructions!
But whatever. I figured it out anyway!
They do not want you to have the instructions, might save you a few dollars. I have it put on work order to give me instruction sheets if they install..
-
Drivers Backrest Support
Would like to know how to unzip the zipper with no end tabs on them in case I need to remove cover. I just adjusted mine tighter and it does not require you to remove cover. Take backrest out of slot where you can bend installation bar with long screw on it and expose the adjustment screw. It takes an 10MM allen wrench and let out to tight...good luck
-
Originally Posted by Gumbeau
Is there an adjustment for this backrest? I'd pay money for one
And now you can! BRP is offering a retrofit-kit for all of the prior year RT backrest, that will allow for some rake adjustment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|