|
-
Active Member
 Jack
Looking to install Sway bar, normal floor jack work? Where's a good jacking point?
2014 Black RTS SE6
2012 Black RS - Sold 7/24/2014
2011 Sonata LTD
-
Very Active Member
PETE
Normal will work OK, you must be careful of tipping it.......ONLY PLACE JACK ( OR PETE ) UNDER THE FRAME........Mike 
-
If you don't have them already pick up some rhino ramps. They work better and are a ton safer too.
Sent from my SCH-I545 using Tapatalk
-
Very Active Member
 Originally Posted by Brogers57
Looking to install Sway bar, normal floor jack work? Where's a good jacking point?
I believe that with the RT you need to get it higher, 24" or so. Do a search there is at least one video.
Last edited by pitzerwm; 07-03-2015 at 11:53 PM.
One of the hardest decisions you'll ever face in life is choosing whether to walk away or try harder.
-
Very Active Member
Ramps
Unless you are an extremely large person, two car ramps will work fine. They are very stable too.
2011 RTS (Sold to a very nice lady)
1998 Honda Valkyrie
2006 Mustang GT. Varooooom!
US Navy Veteran
SC Law Enforcement Boat Captain
CNC Machine Service Technician
President: Rolling Thunder SC1
Member: Disabled American Veterans, Rock Hill, SC
Member: American Legion
Experience is recognizing the same mistake every time you make it!  
-
Active Member
Have you installed Ron's bar on your machine with standard car ramps?
Originally Posted by Grandpot
Unless you are an extremely large person, two car ramps will work fine. They are very stable too.
2014 Black RTS SE6
2012 Black RS - Sold 7/24/2014
2011 Sonata LTD
-
Very Active Member
-
Originally Posted by Chupaca
on how high. Ron's instructions are great..
 these with jack stands work well. One fellow here put ramps on his tailgate and ran the spyder up enough to do the work..[emoji106]
What type of jack is the one you are using? I'll like to get one.
Sent from my SM-N910P using Tapatalk
-
Very Active Member
This one is from sears but harbor freight has them in blue. ATV/motorcycle lifts ...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
22 inches
I just put on my swaybar this weekend. You NEED 22 inches minimum to swing the swaybar out. The jacking up was the hardest part, the installation was smooth!
-
Very Active Member
when I installed my sway bar... I loosened all the bolts using a pair of ramps under the front wheels... then I used 2 - 2x12's placed on the back of my truck.. once on the 2x12's have someone block the rear wheel.. the parking brake is not strong enough to stop your spyder from backing down... then take out the old sway bar & put the new one in... back your spyder down & finish the install..
osm
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
