-
Pitbull Motorcycle Jack
Anyone using a Pitbull motorcycle Jack to lift your RT? I have the air over hydraulic standard lift. According to Pitbull, I need the Dyna lift because the standard size jack will make contact with the exhaust.
Any pictures of the lift under the trike is appreciated.
-
-
-
Pittbull Jack
I use a Pitbull jack to lift my 2014 RT with no problem. I did put a piece of 1/2" board (4" Sq +/-) on the on lift bar side toward the rear wheel on the frame and the front went across the main frame and the bars that run to the outside from the main frame. I did not take a picture but with me that is part of the course.
-
-
Using the Harbor Freight ATV jack. Been using it since day one. Works fine on my RT.
http://www.harborfreight.com/1500-lb...ift-60536.html
Bob
-
-
just dont take off one of the front wheels the bike will tip other than that those jacks work great??
-
Originally Posted by trikermutha
just dont take off one of the front wheels the bike will tip other than that those jacks work great??
The Pitbull lift has tie down points to secure your bike or Spyder. If used, it shouldn't be a problem.
I have the foot pump style Pitbull, which I bought many years ago. Love it. I now also have a table lift (air), which does a great job too. Had to add 9" width to the 48" standard width to accommodate the wider front wheels of the Spyder. now I have to back the Spyders onto it, but I can do that! It was originally designed for standard trikes.
-
-
Very Active Member
Those same Jacks are yellow at Sears and blue at Harbor freight. Pit Bull does not manufacture them. They do use them. Just to clarify for the Newbies.
Jack
Even old "square Joe" uses one.
All my life I wanted to be somebody, now I realize I should have been more specific.
2019 Specialized E-Bike COMO 2.0
2018 Jeep Grand Cherokee Overland
2018 Tiffin Phaeton 37BH Motorhome
2015 BMW R1200R LC
2014 RTL SE6 Pearl White
2012 RT-622 trailer viper red
2014 Look 7x12 motorcycle trailer silver and black
2011 Polaris Ranger green
2013 GMC Yukon Denali XL silver oak
2016 Can Am Maverick
-
-
Regardless of what you use o jack up the Spyder, USE floor stands before working on your Spyder.
-
Originally Posted by ursamajor35126
Model #, cost please
TIA
http://stores.pitbullbikershop.com/
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|