2015 an Am Spyder RT Limited
2013 Yamaha WR250R - Sold
2011 Can Am Spyder RT-S SE5 Limited - Sold
2011 Aspen Sentry Trailer
2003 BMW K1200LT - Sold
2007 Unigo Trailer - Sold
2001 BMW K1200LT - Sold
2001 Honda 750 NightHawk - sold
2015 RT Ltd , Canamspyderaccessories Brake pedal ext. Red
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
[Add his shoxk spring adjusters and you willl be real happyQUOTE=DriftersWay;972577]I just installed my BajaRon Sway Bar. Took me 2 1/2 hrs.
Just a short drive around the block and what a difference.
Thanks Ron. You are the man.
Butch[/QUOTE]
2014 rt-s black,bump skid,baja ron swaybar and shock spring adjusters,rivco highway mounts &pegs and trunk flag holders 2014 900 ace renegade
Installed the BajaRon SwayBar yesterday. Not too hard to do. I bought a low-profile long reach 2 ton floor jack from Harbor Freight which slides under the 2014 RT without needing ramps or boards to drive on. I placed a piece of plywood on the jack bell to protect the frame and prevent sliding (metal-to-metal). I also bought a pair of rubber caps to put on the jack stands to protect the A-arm tubes. I raised the jack stands up under the A-arms every 2 inches or so as I jacked it up just for safety. I measured 19" (behind the sway bar) from the frame to the floor and stopped there and it was high enough to remove the old sway bar and install the new one. I also removed two screws that hold the plastic cover over the lower A-arms as the jack stands seemed to put some pressure on them.