Results 1 to 9 of 9
  1. #1
    Registered Users
    Join Date
    Aug 2014
    Location
    Fishkill, NY
    Posts
    14
    Spyder Garage
    0

    Default Help!! Clutch lever has no Tension?

    hi all, start my spyder up today, and clutch lever has no tension at all!! I'm so afraid to put it in to gear so i didn't. any though before i call my dealer. Thanks.
    its a 2013 ST-S SM5 with about 550 miles on it, not even first oil change yet...

  2. #2
    Very Active Member Highwayman2013's Avatar
    Join Date
    Nov 2012
    Location
    North Las Vegas, NV
    Posts
    4,561
    Spyder Garage
    1

    Default

    Check the fluid in the reservoir. Could be low or needs to be bled.
    2016 F3 Limited
    2019 Ryker Rally
    2014 Suzuki V Strom 650
    2020 CSC TT 250
    2016 F 3 Limited , Vegas White

  3. #3
    Very Active Member
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default Agree..!!

    You may have to bleed the system. If it is low on fluid you need to see why. Seems to have very low mileage to have lost pressure. Check for leaks at all points. If there are none it could be in the slave cylinder. Hope you find the probkem else take it to the dealer...
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  4. #4
    Registered Users
    Join Date
    Aug 2014
    Location
    Fishkill, NY
    Posts
    14
    Spyder Garage
    0

    Default thanks,

    yeb, the reservoir is empty, there are no leak spot on the floor! i'll let you guys know how its go.

  5. #5
    Very Active Member
    Join Date
    Oct 2007
    Location
    Johnson City TN
    Posts
    686
    Spyder Garage
    0

    Default

    My GS did this it puddled on the plastic. It was a o ring in the slave cylinder. $3 fix.

  6. #6
    Very Active Member
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    Quote Originally Posted by one2doo View Post
    My GS did this it puddled on the plastic. It was a o ring in the slave cylinder. $3 fix.
    I had an RT that did the same thing. Nothing on the garage floor it was all on the plastic.
    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  7. #7
    Registered Users
    Join Date
    Mar 2014
    Location
    Fort Lauderdale FL
    Posts
    54
    Spyder Garage
    0

    Default had the same problem

    When my spyder was new had the same problem slave end was leaking internally dealer needed to rebuild. Guess there must of been some defective 2013 sts units

  8. #8
    Registered Users
    Join Date
    Aug 2014
    Location
    Fishkill, NY
    Posts
    14
    Spyder Garage
    0

    Default

    Quote Originally Posted by moe113097 View Post
    When my spyder was new had the same problem slave end was leaking internally dealer needed to rebuild. Guess there must of been some defective 2013 sts units
    Thanks, will call the dealer for appointment when all the freaking snow are gone...

  9. #9
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Bee Mera View Post
    Thanks, will call the dealer for appointment when all the freaking snow are gone...


    Do it now while the snow is here and ride when the snow is gone.


    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •