-
Registered Users
-
Very Active Member
-
MOgang Member
-
Very Active Member
Great work Yves. If you are going to Spyder Odyssey in August, I would love to see your bike in person. Keep up the good work.
-
Very Active Member
Well done..!!
your a busy man. Nice mods and farkels to bad your not ryding yet to give us the review. Congrats on your new F3..
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Registered Users
-
Registered Users
Nice work . . .
. . . I hope Sping comes early for you so you can get out on the road with the F3.
Tom
2008 GS SE5 -> 2013 STS SE5 -> 2015 F3-S SE6 . . . Still riding & smiling.
-
Active Member
cat bypass install
Hi YVES, great mods, you also mentioned that you are going to install the Cat Bypass , do you know if this install will void the warranty or is this acceptable by BRP. Hello
Originally Posted by BAM
hi my name is YVES i came from quebec canada i new on here but not new to the spyder familly ive owed a 2013 rs-s neutron green and a 2014 yellow rs-s all sm5
and my new project
magnesium f3-s sm6
here a video of my build to date hope you find that interesting
next thing i want is the spring to come it's -24 c right now
Last edited by Doug; 02-17-2015 at 05:35 PM.
-
Very Active Member
Ditto Here
Your outdoor pictures look just like our winter here in Northwest Ohio and I share the same wishes for it to go away ASAP. I gather from your video that an RT anti sway bar will fit an F3. If that is indeed true it would mean the BajaRon bar will fit it. This would make possible even more cornering capability on what is reported to be the best handling Spyder yet made. Thanks for sharing your video and your pictures with us.
-
RT-S PE#0031
That's some awesome work you're doing on your F3! Welcome to SpyderLovers!
Mark & Mary Lou Lawson
Snellville, GA USA
'10 RT-S PE #0031
'10 RT-622 Trailer
'08 Yellow SM5 #2332
'01 Black GL1800A Goldwing #0930
"Remember in the darkness what you have learned in the light." - Joe Bayly
-
Active Member
Originally Posted by BAM
hi my name is YVES i came from quebec canada i new on here but not new to the spyder familly ive owed a 2013 rs-s neutron green and a 2014 yellow rs-s all sm5
and my new project
magnesium f3-s sm6
here a video of my build to date hope you find that interesting
next thing i want is the spring to come it's -24 c right now
Congrats on the F3, Very nice bike
-
Very Active Member
-
Very Active Member
Allo Yves, bienvenu sur SpyderLovers.
J'ai eu la chance de voir le nouveau F3 pour la premiere fois cette fin-de-semaine au show de moto d'Ottawa, belle machine.
J'ai un RT Ltd 2014.
Bonne promenade, si le printemps peux finalement arriver.
J.P. Legault
-
Very Active Member
What rear tire is that?????
-
Registered Users
Originally Posted by Mike,P
What rear tire is that?????
it's a yokohama advan 048 225 50 r15
sway bar from the rt will fit this bike it's larger than stock one you need 4 rt bushing too
didnt know about bajaron
the rt bar and bushing is around 80$ cdn bajaron 300 US
ive done it on my rss swaping for the rt bar and the diffrence was huge remember a f3 is about the same weight and more important you sit lower on it
no doubt it's gonna be a blast
Last edited by BAM; 02-17-2015 at 04:36 PM.
-
Active Member
Fender Mod
I just upgraded to a F3S (red) from a RT and saw your post on the mods to your F3S! I really like the idea of what you've done with the rear fender, as I'm not a big fan of the original enclosure. Do you happen to have the part number for the fender you used from your previous Spyder and any pics on how you mounted it to the underside of the seat.
Your clearly way more handy than I, and any additional info / pictures you have would be greatly appreciated.
Thanks,
Daryll from Edmonton
Last edited by llyrad; 02-19-2015 at 02:27 AM.
-
Active Member
Originally Posted by BAM
hi my name is YVES i came from quebec canada i new on here but not new to the spyder familly ive owed a 2013 rs-s neutron green and a 2014 yellow rs-s all sm5
and my new project
magnesium f3-s sm6
here a video of my build to date hope you find that interesting
next thing i want is the spring to come it's -24 c right now
Bravo Yves Félicitalions.
Maurice RV Full Timer
Spyder RT SM6 2014 Blanc Pearl.
-
Registered Users
Originally Posted by llyrad
I just upgraded to a F3S (red) from a RT and saw your post on the mods to your F3S! I really like the idea of what you've done with the rear fender, as I'm not a big fan of the original enclosure. Do you happen to have the part number for the fender you used from your previous Spyder and any pics on how you mounted it to the underside of the seat.
Your clearly way more handy than I, and any additional info / pictures you have would be greatly appreciated.
Thanks,
Daryll from Edmonton
the part number is 219400400
http://store.spyder.brp.com/product/...030.1420948768
but be aware it a rs st sport fender that as to bee custom fit to the f3 (cutting plastics and drilling 3 hole in the under tail 2 for bolt 1 for the electrical connecter
but on a scale 1 to 10 1 washing the bike 10 rebuild and engine from ground up it's a 3-4
i will post some picture tomorow more detailed
-
SpyderLovers Founder
Nice work, thanks for sharing with us all.
-
Registered Users
-
Active Member
Thanks
Bam thank you for the pics, this will make it so much easier in the spring to do the fender! It's really appreciated.
Daryll from Edmonton
-
Registered Users
-
Registered Users
2008 GS SE5 -> 2013 STS SE5 -> 2015 F3-S SE6 . . . Still riding & smiling.
-
Active Member
Sounds awesome!
Just another crappy day in Paradise....Aloha!
-
Active Member
Very nice mods and a great video/photos.
Sounds great!
2015 F3-S Pearl White SM6 with a 7 Jurock custom windshield, Smooth-Spyder backrest, Shad saddle bags, RT sway bar, Elka stage 2 shocks in front and stage 2 with hyd. adjuster in the rear. Lamonster's LED fog lights, TricLed headlights, TricLed Safety LED package.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|