-
Active Member
What's it for?
Hey all,
Can any one tell me what this post/valve/nipple is for on the right side and in front of the muffler on my 2012 rt ltd se5?
I ran over a curb the other day and broke this off completely, leaving a quarter size hole.
Patched up the hole and all is good there as far as noise is concerned.
This is the link to BRP parts showing the part in question. It is number 16/17.
http://parts.spyder.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\1s\\06\Y1202\21Y 1202.tif&ilSC=25&ilIV=0&ilBR=0&ilIF=P&ilRE=8
Thanks in advance, you folks are the greatest.
Last edited by philblumenfeld; 02-13-2015 at 01:28 PM.
-
Very Active Member
Your link
only takes us to the index. No details.
Ed
They told me not to give up on my dreams, so I went back to sleep.
Champagne 2017 RTS SE6
Quantum Blue 2012 RTS-SE5 "Bluebell, Bell for short" - Traded 09/2017
-
Active Member
It appears to be a test port that is capped off. I do not think it is anything to worry about, as long as your repair is sufficient.
-
Active Member
Originally Posted by 2Paw
only takes us to the index. No details.
Sorry about that.
Try this:
http://parts.spyder.brp.com/cgi-bin/...&ilIF=P&ilRE=8
-
Very Active Member
NO BIKE AT THIS TIME
-
Very Active Member
Test port...
as long as you plugged the hole your fine. Used to balance cylinders as far as mixtures go. Have not seen them used very often. At some point you could have them weld on another...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|