Winter Farkle Time!

[Purple Guy]

Had a chance to do a little Farkleing!

Have to thank Deanna777 for the inspiration for Farkle #1
Painted my Dashboard Bezel




Had a chance to put on my Spyderpops Stainless Grilles & KOTT Grilles











I'd also like to give a shoutout and to Finless Bob for his video on replacing the Spyder Speakers, probably saved me a week!

And this little gem is a pic of just how far you have to go to replace the saddlebag cargo module, I don't recommend this!!! (rear speaker not part of this tear down)

[Chupaca]

looks great. The dash is awesome and always liked the grilles. But winter is not over..what else..??

[tip]

Great job!

[garb55]

Did you use OEM paint on the dash or did you find some other paint that matched
I want to do dash and rear fender
Thanks
Don

[Deanna777]

Did you use OEM paint on the dash or did you find some other paint that matched
I want to do dash and rear fender
Thanks
Don

I used VHT High Temperature Engine Metallic Drive Train Paint Chemical Resistant Coating. Sent a pm Deanna

[Purple Guy]

looks great. The dash is awesome and always liked the grilles. But winter is not over..what else..??

Still working on the speaker upgrade, powder coated windshield bracket and I just ordered the Top Case Mirror from Doc Humphreys.

[Purple Guy]

Did you use OEM paint on the dash or did you find some other paint that matched
I want to do dash and rear fender
Thanks
Don

VHT high temperature Engine Metallic SP402 Burnt Copper + Clear Coat

[BLUEKNIGHT911]

VHT high temperature Engine Metallic SP402 Burnt Copper + Clear Coat

....Since you have used this Paint and seen it close up and personal , do you agree that it is EXTREMELY close to the OEM Cognac color.........The only thing I did different was to keep the area directly around the instrument cluster FLAT BLACK, to prevent any glare possibilities..........I found this paint awhile back and used it on my RSS ( after buffing the shine out ).....I then convinced DEE that with a few coats of CLEAR in would deepin the shine effect............I think it really makes the Dash surround POP..................Nice job.........Mike

[Purple Guy]

....Since you have used this Paint and seen it close up and personal , do you agree that it is EXTREMELY close to the OEM Cognac color.........The only thing I did different was to keep the area directly around the instrument cluster FLAT BLACK, to prevent any glare possibilities..........I found this paint awhile back and used it on my RSS ( after buffing the shine out ).....I then convinced DEE that with a few coats of CLEAR in would deepin the shine effect............I think it really makes the Dash surround POP..................Nice job.........Mike

The color match is spot on! At $15 a can how can you go wrong!
I thought about leaving the part closest to the gauges black as well, after the first couple coats.
I like the look I have though and if glare becomes a problem it will be an easy enough fix.

[BLUEKNIGHT911]

[QUOTE=Purple Guy;930134]The color match is spot on! At $15 a can how can you go wrong!
I thought about leaving the part closest to the gauges black as well, after the first couple coats.
I like the look I have though and if glare becomes a problem it will be an easy enough fix.[/QUOTE.......................Only $ 8.50 here, but if you actually used BRP paint it would have been $ 50 + at least..............glad you liked it ,,,,,,Mike

[Purple Guy]

[QUOTE=BLUEKNIGHT911;930520]

The color match is spot on! At $15 a can how can you go wrong!
I thought about leaving the part closest to the gauges black as well, after the first couple coats.
I like the look I have though and if glare becomes a problem it will be an easy enough fix.[/QUOTE.......................Only $ 8.50 here, but if you actually used BRP paint it would have been $ 50 + at least..............glad you liked it ,,,,,,Mike

$8.50 USD, that's just short of $100 CAN!

[ARtraveler]

A beautiful paint job.

[Deanna777]

Thanks you, thank you, thank you, Deanna

[Dubld]

You inspired me! That dash really pops! I ordered the paint to do mine.

[m2motorsport]

Had a chance to do a little Farkleing!

Have to thank Deanna777 for the inspiration for Farkle #1
Painted my Dashboard Bezel




Had a chance to put on my Spyderpops Stainless Grilles & KOTT Grilles rohana wheels











I'd also like to give a shoutout and to Finless Bob for his video on replacing the Spyder Speakers, probably saved me a week!

And this little stance wheels gem is a pic of just how far you have to go to replace the saddlebag cargo module, I don't recommend this!!! (rear speaker not part of this tear down) tsw wheels

NICE WORK!!