|
-
 My latest homemade farkle
IMG_0809.JPGIMG_0810.JPGIMG_0808.JPG
Just finished my rack. Have a 15" stoplight on order to place under the rear lip.
On to another project!!
Last edited by tip; 01-18-2015 at 02:52 PM.
Reason: words left out
-
Very Active Member
I like the different design. Did you make that yourself?
Many years ago when I bought a mountain bike, I had to make my own rear bike rack because none were made for my size bike frame. (17")
When it was replaced with a commercially made one, I had to learn how to shift my weight all over again for proper traction in different situations. Thought about putting the heavier one back on?
Last edited by Cavman; 01-18-2015 at 03:26 PM.
-
Very Active Member
Looks cool but rather small, is it functional?
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
My bad, I re-read your title....homemade.
-
rack design
Own design and labor - except for 3 bends!
 Originally Posted by Cavman
I like the different design. Did you make that
Many years ago when I bought a mountain bike, I had to make my own rear bike rack because none were made for my size bike frame. (17")
When it was replaced with a commercially made one, I had to learn how to shift my weight all over again for proper traction in different situations. Thought about putting the heavier one back on?
-
Very Active Member
-
Very Active Member
Nicely done..!!
another nice picece of handiwork..congats..!! 
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
brake
Originally Posted by SPYD3R
MUST BE NICE TO HAVE A 'PRESS BRAKE'...... 
SWEET, I LIKE IT.... 
dp
I don't have a brake that will handle 3/16" aluminum - wish I did. This was the most tedious farkle yet!!
-
rack
Originally Posted by Cruzr Joe
Looks cool but rather small, is it functional?
Cruzr Joe
It is 9 1/2" deep X 16" wide at the center. Strong enough to hold anything the lid can handle.
Built mainly to hold brake light and of course , looks also!
-
Registered Users
Nice rack!! Lol.... No really, you did a great job on that mod. If I didn't know better I would have guessed it to be a bought rack. From one fabricator to another, good job.
-
Very Active Member
Nice job!
Have been able to use it?
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Active Member
That's really nice, now can you make me one for my rs? Just big enough for my lunch box?
-
rack
Originally Posted by Deanna777
Nice job!
Have been able to use it?
Deanna
Just made -as in literally just installed to take pictures! It's main purpose will be to hold my stoplight
-
Very Active Member
Well Done!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
www.CincyBikesandTrikes.com
