Lamonster F3 Project "Triple Threat"

[den1953]

I like that rotary cannon gatling gun exhaust. Very cool looking plus they sound good too.

[Lamonster]

Some teaser pics from the F3 project. These parts were printed out and test fit before going to the mill Great way to prototype parts. Wait till you see the rest.
Oh and I do have a bolt-on hitch for it now. It turned out killer.

[LV2RYDE]

Some teaser pics from the F3 project. These parts were printed out and test fit before going to the mill Great way to prototype parts. Wait till you see the rest.
Oh and I do have a bolt-on hitch for it now. It turned out killer.

Happy to see the position of navigation system is in the center not on the handlebar...can't wait for this one too.
thanks

[Spyder 42]

I have one more piece to put on and then I start putting the body back on. Everything looks great Red.

much better than the Can-Am Red

[Lamonster]

Happy to see the position of navigation system is in the center not on the handlebar...can't wait for this one too.
thanks

I was going to make it adjustable but it put it too high for the look I wanted but it works out great and the angle it is now. I'm one of those guys that needs a gps to find my way home so this was a must have for me and I'm sure it will be for others too.

[Mike,P]

I was going to make it adjustable but it put it too high for the look I wanted but it works out great and the angle it is now. I'm one of those guys that needs a gps to find my way home so this was a must have for me and I'm sure it will be for others too.

Any chance of Hitch pics 😎 Do you think you're gonna be selling them??? BTW everything looks great so far!!!!! My dealer just received their first F3 n I'm leaving shortly to go have a touchy feely session w it😎

[Retired 2012]

Hello,
New to Spyders this F3-S is my first. The manual didn't come with the unit so the dealer ordered one for me.
I have the one you started out with. My questions are very basic: How do you re-charge the battery on the F3-S? And can a CB/blue tooth/intercom
system be added to it? Are you planning to sell the gps mount that you made? I would be interested in getting one.
Thanks for your assistance.
Again your bike look great.

[chuck gross]

Nice looking mods Lamont thanks for the sneak peek

[doctorlbug]

Nice looking mods Lamont thanks for the sneak peek

I like the sound with the Secondary Exhaust replaced, with the stock muffler video

[GunDoctor]

Curious with the nanny on the F3 if a hitch is fabricated. I have read that special programming has been done for the Spyders that have hitches as standard equipment. All this would not be the case of the F3.


Another Day To Be My Kid's Dad [emoji379]

[Lamonster]

Curious with the nanny on the F3 if a hitch is fabricated. I have read that special programming has been done for the Spyders that have hitches as standard equipment. All this would not be the case of the F3.


Another Day To Be My Kid's Dad [emoji379]

This is what I've been told too but they also said the GS/RS had the same programing "no trailer" and I put over 50,000 miles on mine with a trailer pushing it as hard as you could push it with no ill affect.

[GunDoctor]

Works for me, you're the man. Build it and they will come


Another Day To Be My Kid's Dad [emoji379]

[Smallz]

Some teaser pics from the F3 project. These parts were printed out and test fit before going to the mill Great way to prototype parts. Wait till you see the rest.
Oh and I do have a bolt-on hitch for it now. It turned out killer.

Lamonster - When do you expect the passenger rails to be ready for order? Do you have an idea on cost? Any plans for a center mount that can hold phones?

[Smallz]

Lamonster - When do you expect the passenger rails to be ready for order? Do you have an idea on cost? Any plans for a center mount that can hold phones?

And can they be painted/color sanded to match the orange frame?

[Lamonster]

Lamonster - When do you expect the passenger rails to be ready for order? Do you have an idea on cost? Any plans for a center mount that can hold phones?

And can they be painted/color sanded to match the orange frame?

Right now we have 34 new part numbers for the F3 including a phone mount. Not sure on production dates yet but I'll keep you posted.

[Lamonster]

I got some of my parts back from the powder coaters and the paint is getting the base color today. Tomorrow I'll be bolting up the new paint to start laying out the artwork. Pretty excited.

[Lamonster]

New Fox shocks installed

[Lamonster]

New pipe will be in place this week.

[Lamonster]

Got the old panels off and the new base coat on. Now the artwork starts.

[Grandpaspeed]

Looking good and enjoying your updates. Thanks and keep them coming.

[GunDoctor]

Looking like it's starting to take form.


Another Day To Be My Kid's Dad [emoji379]

[Marker]

Like the new Tailgunner exhaust,sound is awesome !
Did you get new body panels made or just have Nathan paint the OEM panels?

[Roadster Renovations]

Project is coming along nicely! Excited to see the finished product.!

[Purple Guy]

It's really starting to take shape!
Looks Great!

[den1953]

Thanks Lamont for keeping us updated on this F3 project bike. I probably won't be going to Daytona, but hopefully some pictures & videos will be posted here. Keep up the great work.