Handle bar cup/drink holder ?

[Orange Spyder Man]

Hello all.. I just got my 2014 Spyder RT... I would like to add a handle bar mount cup/drink holder.... suggestions ? where to find & if possible a picture of one..

thanks,
OSM

[NovaSpyder]

Hi there and You will find quite a range of cup holders ranging from $10 toys r us version to $150 custom made, depending on your individual preference. There are a number of site sponsors that provide cup holders. Personally I have this one http://www.eduoinnovations.com/. A site sponsor, I really like it, very good quality and fitment.

[joebryanjr]

Diamond R has one that fits the 2014 RT. I have one.

[Dragonrider]

I did my own from stuff I already had around:

[DJFaninTN]

Butler Mug and you can thank me later

http://Order # 115-9117476-9213038

[Cruzr Joe]

Do yourself a favor and and follow this lead for the best cup holder you can find for the Spyder, many a friend of mine tried several different ones and then finaly agreed that this was the best.

Cruzr Joe

Hi there and You will find quite a range of cup holders ranging from $10 toys r us version to $150 custom made, depending on your individual preference. There are a number of site sponsors that provide cup holders. Personally I have this one http://www.eduoinnovations.com/. A site sponsor, I really like it, very good quality and fitment.

[PrairieSpyder]

Butler Mug and you can thank me later

http://Order # 115-9117476-9213038

Link goes nowhere!

[vided]

Link goes nowhere!

[Scooter]

Hello all.. I just got my 2014 Spyder RT... I would like to add a handle bar mount cup/drink holder.... suggestions ? where to find & if possible a picture of one..

thanks,
OPM

I got my cup holder from Inspector Gadget @ spyderrt@yahoo.com He makes several items for Spyders. If for some reason the Web Site does not work he is on US Spyder Ryders Web Site

[LEEB]

My Cup Holder sits on the seat behind me on my RT!!

[james68]

www.drink2go.net youtube.com/drink2go

[BLUEKNIGHT911]

......A site sponsor here and vendor .....Value Accessories .....$ 10 + .........Mike

[3 Wheel Addict]

Hi there and You will find quite a range of cup holders ranging from $10 toys r us version to $150 custom made, depending on your individual preference. There are a number of site sponsors that provide cup holders. Personally I have this one http://www.eduoinnovations.com/. A site sponsor, I really like it, very good quality and fitment.

Heads up, this will not fit if you have Tri-axis bars on your bike.

[robmorg]

I've also looked at many of these, and for the RT, THIS is the one I prefer. It's from Rivco, who is also a site sponsor. The bracket is made specifically for the RT. I like it because it eliminates the need to install a clamp around your handlebar. The cup holder (sold separately from the bracket) comes in chrome, black. or leather, and includes various size foam inserts to handle any size cup. It's very well made - all metal, no plastic, yet it isn't terribly expensive.

Here is a picture of the chrome one mounted on my Spyder.

The Drink-2-go one, mentioned by James68 above, is great for the rear seat, as it will clamp securely onto the rear hand grip.

Congratulations on your new RT. There's lots of fun in your future.

[robmorg]

Butler Mug and you can thank me later

http://Order # 115-9117476-9213038

Link goes nowhere!

Here's the link... glassact.com

[Dragonrider]

I've also looked at many of these, and for the RT, THIS is the one I prefer. It's from Rivco, who is also a site sponsor. The bracket is made specifically for the RT. I like it because it eliminates the need to install a clamp around your handlebar. The cup holder (sold separately from the bracket) comes in chrome, black. or leather, and includes various size foam inserts to handle any size cup. It's very well made - all metal, no plastic, yet it isn't terribly expensive.

Here is a picture of the chrome one mounted on my Spyder.

The Drink-2-go one, mentioned by James68 above, is great for the rear seat, as it will clamp securely onto the rear hand grip.

Congratulations on your new RT. There's lots of fun in your future.

I liked their bracket, but not the cup holder. Mine is from the Ram system, modified to attach to the bracket (very easy task). It allowed more flexibility in cup/bottle sizes, included a foam wrap for cans and frozen bottles of water, allows condensation/spills to run out, and adds fore/aft movement to minimize spills... it had a tab on the back to allow it to lock into place, for some installations, that needed to be removed, but didn't compromise the holder at all...

[sduskin]

Link goes nowhere!

http://www.glassact.com/gallery7.htm

[sduskin]

My Cup Holder sits on the seat behind me on my RT!!

But she kept passing forward an empty cup!!!

[robmorg]

I liked their bracket, but not the cup holder. Mine is from the Ram system, modified to attach to the bracket (very easy task). It allowed more flexibility in cup/bottle sizes, included a foam wrap for cans and frozen bottles of water, allows condensation/spills to run out, and adds fore/aft movement to minimize spills... it had a tab on the back to allow it to lock into place, for some installations, that needed to be removed, but didn't compromise the holder at all...

Thanks, Dragonrider. That's not a bad idea!

I can see how the Ram cup holder could easily attach to the Rivco bracket for the RT. Probably just need to find the right size nut & bolt. The one disadvantage of my solid cup holder is that the drinks do tend to spill. Apparently not so with the Ram drink holder. See video...

[Dragonrider]

All you need is a lock nut and washer - the rest ports straight across. Be sure to trim the plastic piece off the back of the holder, or it could brush the dash, on a hard turn.

This is, by far, the best set up I've had in years.

BTW, I have at least two Butler sets (different sizes), or at least most of the parts. If someone wants them, PM me & you can have them for the postage....

[Bob Denman]

I know that I'm probably the least-entitled person in here to complain..
But your avatar makes me want to curl up in a ball somewhere...
Arachnophobia... it's a bitch!

[jcthorne]

I liked their bracket, but not the cup holder. Mine is from the Ram system, modified to attach to the bracket (very easy task). It allowed more flexibility in cup/bottle sizes, included a foam wrap for cans and frozen bottles of water, allows condensation/spills to run out, and adds fore/aft movement to minimize spills... it had a tab on the back to allow it to lock into place, for some installations, that needed to be removed, but didn't compromise the holder at all...

Bought the Rivco as well, loved the perfect fit bracket with no clamp but did not like the cup holder part. Used the RAM gimble mount on the Rivco bracket and it works very well.

[HedonismBot]

I did this: http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1. Took all of 5 minutes install and performed flawlessly for 600 miles last weekend. Plus, you can't beat the price.

[robmorg]

That works. ...and, you don't have to take your hand off the throttle to take a drink.

[SPECTACUALR SPIDERMAN]

Hi there and You will find quite a range of cup holders ranging from $10 toys r us version to $150 custom made, depending on your individual preference. There are a number of site sponsors that provide cup holders. Personally I have this one http://www.eduoinnovations.com/. A site sponsor, I really like it, very good quality and fitment.

I have that one too, if you are going to get one go for the gold, our bikes are worth it