-
Active Member
F3 Windshield
I really like the F3 and can't wait to test one out, but I also really like to have some wind protection on long rides. think there is any possibility of an aftermarket shield? or is this bike to cool
What do you all think??
Rich
-
BRP will offer a touring package that has a taller windsheild; that might just do what you want,,,
-
Very Active Member
I don't think it will take long for the aftermarket to sense opportunities for the F3, but this time out I think BRP is providing a much broader range of options than they have for past units
220,000 Mile Spyder Ryder, IBA Premier member #59352, Saddlesore 1000 (11), Bun Burner 1500 (3), Saddlesore 2000 (2), Bun Burner Gold, MILEEATER SILVER
-
They had several windscreens listed on the web site if you go through the "Build" screen. The tallest one was "medium".
Robert G.
Suzuki Burgman 400, Can-Am Spyder RS
-
Very Active Member
I am looking at buying a 2014 RT in the next week or so. I really like the shorter windscreen that is on some of the 2015 models. I assume they make a shorter windscreen allready for the RT's, but I haven't seen one.
2021 RTL , brake pedal from "Web Boards" chalk white
-
Very Active Member
Route 66 and Blue Ridge
The Route 66 windshield looks the tallest and has a flared "flip" at the top edge to deflect air upwards. The Blue Ridge doesn't look to be as tall nor does it have the flared edge. Both are just under $400 each.
-
Wonder how hard they are to take on and off .I like the wind in my face on short rides
-
Very Active Member
I kinda liked the look of the Blue Ridge shield. Looks like it would be fun to take the F3 "cruiser" and turn it into a light tourer.
Phil
I may be old, but I got to see all the cool bands.
2011 Spyder RT-AC
-
Very Active Member
Touring Package
I saw on the BRP website that a touring package which has that Blue Ridge windshield will be available. Normally a factory package will be considerably cheaper than buying the individual components. I haven't yet seen the cost for this package deal yet but would expect it to be at least several hundred dollars less than buying those items and installing them.
-
Originally Posted by blacklightning
I am looking at buying a 2014 RT in the next week or so. I really like the shorter windscreen that is on some of the 2015 models. I assume they make a shorter windscreen allready for the RT's, but I haven't seen one.
I'm using the 23" vented BRP replacement on my 2014 RT and am quite happy with it. Down, it gives good air and up it gives decent protection.
-
Very Active Member
Pardon me sir
The original post was in regards to an F3 windshield and not an RT windshield. No harm-no foul, but you're not quoting the OP in this thread.
-
Very Active Member
F-4, what say ye on the F-3????
signed:
Happy RT F-4 Customer
-
...in the pink (Girls On Spyders)
the Route 66 looks like the one that came on the ST...with distortion near where it dips in at top.....but hardware looks like maybe we can put Cal-Sci on...wait and see
#IamARyder #RideASpyder #CanAmSpyder
-
Very Active Member
Originally Posted by rworell
I really like the F3 and can't wait to test one out, but I also really like to have some wind protection on long rides. think there is any possibility of an aftermarket shield? or is this bike to cool
What do you all think??
Rich
At least BRP offers 4 options
220,000 Mile Spyder Ryder, IBA Premier member #59352, Saddlesore 1000 (11), Bun Burner 1500 (3), Saddlesore 2000 (2), Bun Burner Gold, MILEEATER SILVER
-
SpyderLovers Sponsor
Originally Posted by JkRbbt
F-4, what say ye on the F-3????
signed:
Happy RT F-4 Customer
In the R&D stage.....
F4 Customs, Inc.
"The Motorcycle Windshield Folks"
941-347-7496
sales@f4customs.com
<a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>
-
Registered Users
Installing the rt66 windshield on a new F3
Has anyone installed one yet,and if so is to hard to do ?
the dealer wants 50.00 to put it in.
-
Very Active Member
BLUE RIDGE
I ORDERED MINE WITH THE 'BLUE RIDGE PARKWAY' WINDSHIELD......
SAM_1112.jpg SAM_1114.jpg SAM_1115.jpg
expensive, but worth every dime.....
dp
-
Very Active Member
Pretty simple to install
Another Day To Be My Kid's Dad [emoji379]
2015 F3-S. And Another Day To Be My Kids Dad
-
Very Active Member
Blue Ridge
I'll probably go with the Blue Ridge as it's the tallest one available from BRP. So far most who have it seem to like it. If it doesn't pan out for me I can always go to an aftermarket windshield next year when more choices will be available.
-
Very Active Member
Did a 300+ mile back from Springfield to Memphis on the Blue Ridge windshield and compared with the Demo Ride without a windshield, this is the best windshield for me. Rode thru most normal environs (2 lane, 4 lane, passing semis, windy areas, full helmet and 3/4 helmet) and it does a great job!
(Note, I am 5'7" and the windshield covers me up to the bottom neck area)
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
Originally Posted by Genet
Has anyone installed one yet,and if so is to hard to do ?
the dealer wants 50.00 to put it in.
The Route 66 screen for the F3 has been withdrawn from sale...HTH
-
Active Member
favor 129
Has anyone tried the route 129 windshield, I was considering that one and/or the gauge spoiler
-
Very Active Member
Originally Posted by Doug
Has anyone tried the route 129 windshield, I was considering that one and/or the gauge spoiler
My wife has it on her F3 but hasn't ridden it much since we got it. She did like it on the 10+ miles she did on in leaving the dealer. Weather has dropped as soon as I parked in the garage so haven't had a chance to try it but at least it has given me time to farkle up a bit.
The gauge spoiler will only cover the gap between the cluster and the front. Won't do much as a wind protector... well maybe from keeping debris from getting in there.
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
Very Active Member
F3-S Windscreen
I have the Blueridge shield---it looks great but to avoid the wind I need to lean down forward approx 4". It's great for short rides but longer distance would benefit with a windshield 4" taller.
2015 F3's , two 12 volt power outlets Orange & Black
-
Very Active Member
The combination of the Blue Ridge Windshield and a full face helmet provide pretty good wind protection for now, but I will look closely at any taller option that F4 offers to the market
220,000 Mile Spyder Ryder, IBA Premier member #59352, Saddlesore 1000 (11), Bun Burner 1500 (3), Saddlesore 2000 (2), Bun Burner Gold, MILEEATER SILVER
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|