|
-
Registered Users
 Keyed power line
where/what is the easiest keyed power line to access in the frunk on a 2014 RTS?
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
-
Very Active Member
Did yours come with the accessory cigarette lighter adapter in the frunk? If not, then there should a plug dangling (just kidding) behind the knock-out plug.
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
-
Registered Users
 Originally Posted by KX5062
Did yours come with the accessory cigarette lighter adapter in the frunk? If not, then there should a plug dangling (just kidding) behind the knock-out plug.
cool - thank you - didn't even think of that, but then..... thats why I asked a question here... lol
thanks again
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
-
Registered Users
turns out I did have my shop put in cig light adapter, but it is on a keyed circuit (or at least it is now as I moved the fuse from slot 7 to 6, or 8 to 7... whichever switches it from a live lead to a keyed lead)
I am assuming that I need to pull out the battery to get to the wiring leading behind that plug, or is there another way to get at those wires?
yes, I am lazy, and always looking for the easiest way to do things....
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
-
Very Active Member
Originally Posted by lookerjdc
where/what is the easiest keyed power line to access in the frunk on a 2014 RTS?
Power lead to the trunk opener solenoid.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Registered Users
Originally Posted by WasWinger
Power lead to the trunk opener solenoid.
14's don't have the button switch
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
-
Very Active Member
Originally Posted by lookerjdc
turns out I did have my shop put in cig light adapter, but it is on a keyed circuit (or at least it is now as I moved the fuse from slot 7 to 6, or 8 to 7... whichever switches it from a live lead to a keyed lead)
I am assuming that I need to pull out the battery to get to the wiring leading behind that plug, or is there another way to get at those wires?
yes, I am lazy, and always looking for the easiest way to do things....
Honestly, in the end frunk removal might be the "easiest" way. It really isn't that big of a deal. Not fun, mind you, just not overly difficult. 
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
-
Registered Users
I was able to tap into the outlet for the keyed power source
IMG_2622.jpgIMG_2626.jpgIMG_2629.jpgIMG_2632.jpgIMG_2634.jpg
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
-
Very Active Member
Originally Posted by lookerjdc
14's don't have the button switch
But if it's an option then the wiring is there. The switch connects the ground side.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Originally Posted by lookerjdc
I don't recommend leaving the battery access cover like that. There is a lot of water sloshing around back there when washing or driving in the rain. It will make everything in your trunk wet.
2018 F3 LIMITED
-
Registered Users
Originally Posted by billybovine
I don't recommend leaving the battery access cover like that. There is a lot of water sloshing around back there when washing or driving in the rain. It will make everything in your trunk wet.
I won't - I will cut a small area out so the cables can run thru and then use either rubber grommets or something else to help reseal the area
- it is what it is - 2014 Black RT-S - Baja Ron Anti-Sway bar, lots of LEDs, Spyderpops Skid Plate, Twisted Sister HID Driving Lights, Tricled 2nd, 3rd & 4th brake lights, F4 Customs vented windshield, Lamonster highway pegs, Ultimate Tall Boy seat, Utopia backrest
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote