Wind sheild

[3rdwheel]

Where is a good source to get a bigger wind shield fOr my 2013 ST-S

[Chupaca]

on the home page with our sponsors. Brp also has some then go online to ebay etc..

[Spydr in KS]

The Calsci is the best I've had!

[chuck gross]

I put the calsi extra wide on my STL it works really well but the back of my hands hit it when at full left or right turns not a big issue after you get used to it.

[Bob Denman]

There were some initial reports of the Cal-Sci windshields not fitting the bikes exactly, and of the finish not being what was expected.
Is that still true, or have they made improvements?

[hotglue]

I put the calsi extra wide on my STL it works really well but the back of my hands hit it when at full left or right turns not a big issue after you get used to it.

Flamingobabes' hands hit the shield too... I cut the shield in at the top, and took 2 inches of the top of the shield.... FB is short.. and this helped a LOT!!!! and her hands and bars don't hit the shield now....

[flamingobabe]

here are the pics of my Cal-sci shield Mark cut down...I will let him explain
resize shield1.jpg resize shield2.jpg