-
Active Member
BRP trailer wiring harness
Does anyone have the part numbers and/or cost for the BRP trailer wiring harness (3 pieces)? I have a 2014 RTS with hitch sans wiring and a 2012 622 with the 4 wire square plug. Weighing my options, looking at the big bike parts harness as well. I do not want to make my own. I've read over 50 threads on the subject, lots of opinions
Dan
2014 RT-S SE6, 2012 RT-622 trailer
-
BRP Parts
I am looking in the 2014 catalog, and see
4-PIN Trailer Adaptor Harness
Designed to convert 2013-2014 RT-622 trailer's electrical harness into a standard 4-pin trailer connector for automatic use.
RT-622 2013-2014
219400437
$74.99
RT-622 2012 and prior
219400271
$164.99
There is also the RT-622 Tongue Harness
Converts 2011-2012 RT-622 trailers for compatibility with 2014 hitch and module (RT and ST), and 2014 4 pin adapter.
RT-622 2011 to 2014
710003227
$44.99
Chas
Last edited by ChasCS; 08-03-2014 at 02:42 PM.
-
Active Member
I also had the BRP hitch sans wiring harness. I went with the trailer power isolated kit fro Big Bike Parts although I bought it through value accessories who I believe is a site vendor here. It was a pretty easy install and the guy from Value Accessories answered all my questions before I bought. Once you install you end up with a 5 wire cable you have to attach a coupler to. If you are going with the standard BRP trailer I beleive you can buy that piece from them as well. I was wiring for a 4 wire flat trail so I used a Hopkins converter to go from 5 wires to 4 and then put a 4 wire flat coupler I got at Wal-mart on it. If I can answer any questions about what I did PM me and I will send you my phone number.
-
Active Member
Originally Posted by ChasCS
I am looking in the 2014 catalog, and see
4-PIN Trailer Adaptor Harness
Designed to convert 2013-2014 RT-622 trailer's electrical harness into a standard 4-pin trailer connector for automatic use.
RT-622 2013-2014
219400437
$74.99
RT-622 2012 and prior
219400271
$164.99
There is also the RT-622 Tongue Harness
Converts 2011-2012 RT-622 trailers for compatibility with 2014 hitch and module (RT and ST), and 2014 4 pin adapter.
RT-622 2011 to 2014
710003227
$44.99
Chas
Thanks Chas, i looked at those but I don't think that is what I am looking for. They are for the trailer "end" I think but I am looking for the wiring and module that connect underneath the tupperware.
Dan
2014 RT-S SE6, 2012 RT-622 trailer
-
Active Member
Originally Posted by tnhoover
I also had the BRP hitch sans wiring harness. I went with the trailer power isolated kit fro Big Bike Parts although I bought it through value accessories who I believe is a site vendor here. It was a pretty easy install and the guy from Value Accessories answered all my questions before I bought. Once you install you end up with a 5 wire cable you have to attach a coupler to. If you are going with the standard BRP trailer I beleive you can buy that piece from them as well. I was wiring for a 4 wire flat trail so I used a Hopkins converter to go from 5 wires to 4 and then put a 4 wire flat coupler I got at Wal-mart on it. If I can answer any questions about what I did PM me and I will send you my phone number.
Thanks for the kind offer. If I go that route, I will PM you.
Dan
2014 RT-S SE6, 2012 RT-622 trailer
-
Call the dealership for part numbers
http://www.brp.com/en-ca/customer-service
How can I get support for a part or accessory?
Please get in touch with the Parts department of the dealership where you purchased the part or accessory.
Or Call us: 888.272.9222
Chas
-
Very Active Member
If the parts guy at the dealer is the cooperative type he can look up the install instructions for the BRP hitch kit. It will list the part #s for all the pieces.
-
New F3 trailer harness on the 2018s
I'm having trouble finding the new trailer harness for the F3 T 2018. It is not on eBay and can't seem to find it on BRP accessories. I think the part number is 71000634 but not sure. Can anyone direct my in the right direction?
Thanks.
-
Hi there,
Have you figured out your question about a harness for F3 T 2018?
I installed a Can-Am hitch but would like to get a non-Can-Am trailer. Where can I find an adapter between 4-flat and Can-Am's 4-square?
https://theusatrailerstore.com/foldi...or-motorcycle/
https://theusatrailerstore.com/rally...cycle-trailer/
Many thanks!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|