Results 1 to 9 of 9
  1. #1
    Active Member NovaSpyder's Avatar
    Join Date
    Apr 2013
    Location
    Nova Scotia, Canada
    Posts
    154
    Spyder Garage
    0

    Default BRP trailer wiring harness

    Does anyone have the part numbers and/or cost for the BRP trailer wiring harness (3 pieces)? I have a 2014 RTS with hitch sans wiring and a 2012 622 with the 4 wire square plug. Weighing my options, looking at the big bike parts harness as well. I do not want to make my own. I've read over 50 threads on the subject, lots of opinions
    Dan

    2014 RT-S SE6, 2012 RT-622 trailer

  2. #2
    Invalid Emails
    Join Date
    Jun 2014
    Location
    Edmonton AB Canada
    Posts
    1,320
    Spyder Garage
    0

    Default BRP Parts

    I am looking in the 2014 catalog, and see
    4-PIN Trailer Adaptor Harness
    Designed to convert 2013-2014 RT-622 trailer's electrical harness into a standard 4-pin trailer connector for automatic use.
    RT-622 2013-2014
    219400437
    $74.99

    RT-622 2012 and prior
    219400271
    $164.99

    There is also the RT-622 Tongue Harness
    Converts 2011-2012 RT-622 trailers for compatibility with 2014 hitch and module (RT and ST), and 2014 4 pin adapter.
    RT-622 2011 to 2014
    710003227
    $44.99

    Chas
    Last edited by ChasCS; 08-03-2014 at 02:42 PM.

  3. #3
    Active Member tnhoover's Avatar
    Join Date
    Jul 2010
    Location
    York Pa
    Posts
    117
    Spyder Garage
    0

    Default

    I also had the BRP hitch sans wiring harness. I went with the trailer power isolated kit fro Big Bike Parts although I bought it through value accessories who I believe is a site vendor here. It was a pretty easy install and the guy from Value Accessories answered all my questions before I bought. Once you install you end up with a 5 wire cable you have to attach a coupler to. If you are going with the standard BRP trailer I beleive you can buy that piece from them as well. I was wiring for a 4 wire flat trail so I used a Hopkins converter to go from 5 wires to 4 and then put a 4 wire flat coupler I got at Wal-mart on it. If I can answer any questions about what I did PM me and I will send you my phone number.

  4. #4
    Active Member NovaSpyder's Avatar
    Join Date
    Apr 2013
    Location
    Nova Scotia, Canada
    Posts
    154
    Spyder Garage
    0

    Default

    Quote Originally Posted by ChasCS View Post
    I am looking in the 2014 catalog, and see
    4-PIN Trailer Adaptor Harness
    Designed to convert 2013-2014 RT-622 trailer's electrical harness into a standard 4-pin trailer connector for automatic use.
    RT-622 2013-2014
    219400437
    $74.99

    RT-622 2012 and prior
    219400271
    $164.99

    There is also the RT-622 Tongue Harness
    Converts 2011-2012 RT-622 trailers for compatibility with 2014 hitch and module (RT and ST), and 2014 4 pin adapter.
    RT-622 2011 to 2014
    710003227
    $44.99

    Chas
    Thanks Chas, i looked at those but I don't think that is what I am looking for. They are for the trailer "end" I think but I am looking for the wiring and module that connect underneath the tupperware.
    Dan

    2014 RT-S SE6, 2012 RT-622 trailer

  5. #5
    Active Member NovaSpyder's Avatar
    Join Date
    Apr 2013
    Location
    Nova Scotia, Canada
    Posts
    154
    Spyder Garage
    0

    Default

    Quote Originally Posted by tnhoover View Post
    I also had the BRP hitch sans wiring harness. I went with the trailer power isolated kit fro Big Bike Parts although I bought it through value accessories who I believe is a site vendor here. It was a pretty easy install and the guy from Value Accessories answered all my questions before I bought. Once you install you end up with a 5 wire cable you have to attach a coupler to. If you are going with the standard BRP trailer I beleive you can buy that piece from them as well. I was wiring for a 4 wire flat trail so I used a Hopkins converter to go from 5 wires to 4 and then put a 4 wire flat coupler I got at Wal-mart on it. If I can answer any questions about what I did PM me and I will send you my phone number.
    Thanks for the kind offer. If I go that route, I will PM you.
    Dan

    2014 RT-S SE6, 2012 RT-622 trailer

  6. #6
    Invalid Emails
    Join Date
    Jun 2014
    Location
    Edmonton AB Canada
    Posts
    1,320
    Spyder Garage
    0

    Default Call the dealership for part numbers

    http://www.brp.com/en-ca/customer-service

    How can I get support for a part or accessory?


    Please get in touch with the Parts department of the dealership where you purchased the part or accessory.


    Or Call us: 888.272.9222

    Chas

  7. #7
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    9,767
    Spyder Garage
    1

    Default

    If the parts guy at the dealer is the cooperative type he can look up the install instructions for the BRP hitch kit. It will list the part #s for all the pieces.
    2014 RTS , Copper! (officially Cognac)

  8. #8
    Very Active Member
    Join Date
    Oct 2007
    Posts
    4,672
    Spyder Garage
    0

    Default New F3 trailer harness on the 2018s

    I'm having trouble finding the new trailer harness for the F3 T 2018. It is not on eBay and can't seem to find it on BRP accessories. I think the part number is 71000634 but not sure. Can anyone direct my in the right direction?
    Thanks.

  9. #9
    Member
    Join Date
    Apr 2019
    Posts
    1
    Spyder Garage
    0

    Default

    Hi there,

    Have you figured out your question about a harness for F3 T 2018?

    I installed a Can-Am hitch but would like to get a non-Can-Am trailer. Where can I find an adapter between 4-flat and Can-Am's 4-square?

    https://theusatrailerstore.com/foldi...or-motorcycle/

    https://theusatrailerstore.com/rally...cycle-trailer/

    Many thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •