|
-
 2014 RT factory seat drivers backrest
Has anyone installed a drivers backrest on a factory Can-Am Spyder RT 2014 seat?
-
Very Active Member
I did on a optional factory comfort seat for my 2014 if that counts.
2021 Sea To Sky, 2020 RTL
Isn't it weird that in AMERICA our flag and our culture offend so many people......
but our benefits don't?
-
Very Active Member
I installed the Factory back rest on my 2014 seat.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
II also have the factory backrest on my RT. Utopia also makes one that fits the 2014 RT.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
I just installed a Utopia on my 2014 takes about 20 minutes and alot cheaper than brp's. Had one on my 2011 also.
-
Very Active Member
-
 Originally Posted by byker
Has anyone installed a drivers backrest on a factory Can-Am Spyder RT 2014 seat?
I installed the factory backrest on my 2014 RTS. The dealer wanted 30 minutes of labor. Took me about 45 minutes and could easily do it now in 30. Not a tough job.
-
Not adjustable
Originally Posted by Michiganspyderman
I installed the factory backrest on my 2014 RTS. The dealer wanted 30 minutes of labor. Took me about 45 minutes and could easily do it now in 30. Not a tough job.
I had a driver's backrest installed on my 2014 RTS when I bought it. My only complaint is that it's not adjustable. Had I known that, I probably would have checked into Utopia first. I had a Utopia on my Goldwing, and it was adjustable.
-
Active Member
Just got mine yesterday and watched tech. There was no installation just popped out the removable cover on the seat, took the backrest out of the box and popped it in. He showed me how to go under the seat and flick a latch to release it and pop it off. Easy peesy. 2014 RTS SE6. Does the RT have different seat than RTS?
Last edited by schnauzermom; 07-12-2014 at 11:41 AM.
-
Originally Posted by schnauzermom
Just got mine yesterday and watched tech. There was no installation just popped out the removable cover on the seat, took the backrest out of the box and popped it in. He showed me how to go under the seat and flick a latch to release it and pop it off. Easy peesy. 2014 RTS SE6. Does the RT have different seat than RTS?
Must have. I had to add an additional bracket under the seat for the backrest to insert into after removing the plastic cover over the hole in the seat. Not as simple as you just described but still not difficult.
-
Active Member
Yes, you have to install a bracket, but that's all. It's simple and quick.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
