Quote Originally Posted by ScooterJeff View Post
Those are some good suggestions. Here are mine:
  • Move the rear tire air-valve to the opposite side of the rim (away from the belt sprocket)
  • It's great BRP finally came out with their own driver's backrest - now make it adjustable like nearly all the aftermarket products. Also make it removable without tools - maybe some sort of latch from under the seat.
  • Make the rear turn-signals LED like the rest of the lights (most of them).
  • Allow for vertical adjustment of the driver's pegs or floorboards, depending on model.
  • Come up with a different Cruise-control switch - I've always thought the current one is just a little awkward.
"Also make it removable without tools - maybe some sort of latch from under the seat." That is how it currently works!

I agree with all these plus -

Make the side cases larger (fit a full face helmet inside)
Make the funk larger (fit two full face helmets)
Make the rear trunk larger (you get the ideal by now)
Turn signels in the mirrors (so you can see that they are on)
Larger dash info center with larger print
Make the small wings stronger for use as foot rests (Highway pegs)
Louder horn
Helmet locks that are useable.