-
Very Active Member
Need help removing hitch to change rear tire / Please
I removed the caliper and the long bolt that goes thru the axle ,, so what am I missing?? I assume the hitch should come right of with a tug to the rear... Any help is welcome
-
RT-S PE#0060
the hitch fits tight to the swing arm.I USE A SOFT DEADBLOW HAMMER TO tap thehitch back and forth to work it off be careful not to damage the sensor wire when removeing hitch.No need to remove caliper to remove hitch
-
Banged Up Member
-
Very Active Member
Originally Posted by Gordy
the hitch fits tight to the swing arm.I USE A SOFT DEADBLOW HAMMER TO tap thehitch back and forth to work it off be careful not to damage the sensor wire when removeing hitch.No need to remove caliper to remove hitch
Thx,, I removed the caliper to change the tire / have to get the hitch off tooo..
Where is the sensor wire???
-
Very Active Member
-
Very Active Member
Useful video
Sent from my HTCONE using Tapatalk
2012 RT A&C bought new 42312 sold July 2018 56k miles currently driving a 2014 RTSE6 LTD bought October 2018 w 6800 miles nicely farkled
-
Banged Up Member
Originally Posted by Mike,P
I removed the caliper and the long bolt that goes thru the axle ,, so what am I missing?? I assume the hitch should come right of with a tug to the rear... Any help is welcome
I apologize. I didn't read your question accurately. The video, although perhaps helpful, really doesn't answer your question.
Chris
-
RT-S PE#0031
Originally Posted by AbNormy
Useful video
Sent from my HTCONE using Tapatalk
I agree
Mark & Mary Lou Lawson
Snellville, GA USA
'10 RT-S PE #0031
'10 RT-622 Trailer
'08 Yellow SM5 #2332
'01 Black GL1800A Goldwing #0930
"Remember in the darkness what you have learned in the light." - Joe Bayly
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|