-
Very Active Member
modified KITT grill
Went for ride yesterday and factory grill was full of large bugs so I decided to install my KOTT grills
I'm lazy so I do not want to get out any tools when I clean my Spyder
I replaced the 2 bottom attachment blocks on each side with magnetic cabinet latches
then painted everything with black Plasi - dip
I then rode on a very bad dirt rode so I know everything will stay put
20140608_152831.jpg20140608_165737.jpg
now I have to clean out the bugs
Don
PS The lower center bolt is to pull the grill out.
Last edited by garb55; 06-08-2014 at 09:12 PM.
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
-
Very Active Member
Great Idea..!!
pop out grilles...easy cleaning.... Way to go...it does seems like it funnels bugs in...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Originally Posted by garb55
Went for ride yesterday and factory grill was full of large bugs so I decided to install my KOTT grills
I'm lazy so I do not want to get out any tools when I clean my Spyder
I replaced the 2 bottom attachment blocks on each side with magnetic cabinet latches
then painted everything with black Plasi - dip
I then rode on a very bad dirt rode so I know everything will stay put
20140608_152831.jpg20140608_165737.jpg
now I have to clean out the bugs
Don
PS The lower center bolt is to pull the grill out.
Looks nice. I see you did place the metal plates behind the KOTT Grills to allow the magnets to grab. Good idea! For those going to do this, make sure you use those flat metal plates as the magnets will not stick to those KOTT grills alone since they are Stainless Steel!
Last edited by Jim&Teresa; 06-08-2014 at 09:48 PM.
Happy and safe rydin'
2014 Spyder RT Limited - January 2014, Cognac/Black Seat, #958, born on 1-8-14
-
Awesome grill
2012 Spyder RT SE5 Brake pedal mod
-
Originally Posted by Chupaca
pop out grilles...easy cleaning.... Way to go...it does seems like it funnels bugs in...
Bugs, dead leaves, heck I even came back from Americade with grass clippings in there. I'm just waiting to scoop up a squirrel in there. I guess it's time to order a set and install them. Neet idea on the magnetic way to hold them in. Very inventive.
Last edited by sddinnh; 06-09-2014 at 06:58 AM.
-
Very Active Member
Looking good, We need them in Florida to catch Luv bugs. You can collect hundreds in a short ride.
-
-
Great idea with the magnetic blocks! Did you use double sided sticky tape to hold the blocks? I prefer to not drill holes if possible. Any vibrations sound to note?
Thanks again for the great idea.
2014 RT-SE6
Akrapovic Sport Touring 3C Silencer
High Mount Third Brake Light
Kuryakyn Black ISO Motorcycle Grips
LaMonster Spyderdock
LED’s everywhere!
Russell Day-Long w/ Backrest
Seal Floorboards
Spyderpops Bump Skid
Spyderpops KOTT Grill (Keep Out The Trash)
Squared Away Alignment
Riding taught me why dogs stick their heads out the window!
-
Active Member
Where did you get the grills from...
Originally Posted by garb55
Went for ride yesterday and factory grill was full of large bugs so I decided to install my KOTT grills
I'm lazy so I do not want to get out any tools when I clean my Spyder
I replaced the 2 bottom attachment blocks on each side with magnetic cabinet latches
then painted everything with black Plasi - dip
I then rode on a very bad dirt rode so I know everything will stay put
20140608_152831.jpg20140608_165737.jpg
now I have to clean out the bugs
Don
PS The lower center bolt is to pull the grill out.
Hey, great idea! Kudos to you. Where did you get the grills. I would like to try that. Make an awesome day, and ryde often and safe. Paco
Chase the wind every chance you get.....! 2013 Circuit Yellow RT-SE5
Mods: Bump Skid, foam grips; Tric-LED 3rd & 4th tail lights, Mirror turn signals, & front fender lights; CB, Shortee CB & Radio Antennas, NBV Highway Pegs, USA & CA flags on Rivco flag mounts, Black widow frunk logo, Utopia Driver backrest, Sheepskin Driver Seat pad, running & brake light license frame, Chrome Luggage Rack, Ram mount on dashboard for iPad Mini for GPS, Race Tech shocks all around.
-
Very Active Member
I used very small and short sheet metal screws for the magnets but they probably would work with 3m double stick tape [just clean the plastic with alcohol first
the grills came from Spyder pops
he is a sponsor on the home page
I have even had parts of jackrabbits in there and just pulled the grills off and taped them on the ground
took 1 min. to clean them out
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|