-
Radio reception degraded when brake applied
Seems like a power drain that when I apply the brake, the FM reception on my '14 RT-S SE6 turns to c**p. Sounds like it does when you pass under powerlines or an underpass in your car. Happens on all stations. This seems to possibly related to the crystal dynamics HM brake bar I installed. Doesn't seem likely that LEDs would draw that much power but I'm puzzled.
-
Very Active Member
i would unplug it and try it you never know they may have made their plug wrong i have had that happen
-
-
Originally Posted by Rattigan_Roger
It’s not a power drain it’s rf(radio frequency) interference generated by the module.
I’m not familiar with it but I bet your wiring or the module is located next to the antenna
It is routed on the same side as the antenna but that's the route the instructions had. I'll try moving it and see. There's not module per se; just plugs into the right tail light wiring harness.
-
Very Active Member
Radio reception..!!
interference would be the problem. I'm sure if you disconnect radio will be fine but the thing is to have both. Extending the connection, to another location may help or some kind of filter. Might also as the light supplier about it..
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|