Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
I've got the Missus thinking about this one; we talked about it just about all the way to Honesdale, to meet up with Spydaman60 this morning.
He was breaking his bike out of storage!
Hi Bob
If you do this mod...... just remove the seat from the trike before you take it all the way off
mark how far back you want the hinge area to be so you can access the gas cap, turn the seat over
DO NOT remove the staples draw a line with a sharpie where the pan is to be cut, at the ends of the
the line you made top and bottom remove about 3 or 4 staples on eather side of the line then make the cut
fold the door back to see how many staples need to be replaced add the velcro and put it back on the Spyder
that's it should take about 1 hour or less depending on how fast you can remove the seat and build up the
guts to cut your seat pan....
Have fun it's a great mod.
Dave
PS again I wish I had thought of it first....
Originally Posted by Bob Denman
Dave,
How much would you charge for performing this modification to the stock seat?
Don't forget to stuff some rags down the "Unending Holes" to keep any nuts or bolts from dropping down. I got my seat off in a short time when I send it to Utopia for the backrest mod, but getting it back on was a royal bitch for some reason. Waiting to see how you make out on this one; I may well give it a try also.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
One of the first things that I do at the start of a project...
...is try to figure out what I can have go wrong!
(When I set my 2010 up to let me know if the rear or side storage compartments was open; the bike ate a small screwdriver, and a 10mm socket)
Hi Bob
If you do this mod...... just remove the seat from the trike before you take it all the way off
mark how far back you want the hinge area to be so you can access the gas cap, turn the seat over
DO NOT remove the staples draw a line with a sharpie where the pan is to be cut, at the ends of the
the line you made top and bottom remove about 3 or 4 staples on eather side of the line then make the cut
fold the door back to see how many staples need to be replaced add the velcro and put it back on the Spyder
that's it should take about 1 hour or less depending on how fast you can remove the seat and build up the
guts to cut your seat pan....
Have fun it's a great mod.
Dave
PS again I wish I had thought of it first....
Thanks Dave for replying to Bob's post
I was out riding all day and just got back and don't want to see anyone do it wrong a ruin there seat
That is exactly how I did it
Don
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
Hi Bob
did you ever get the guts to make your hidden gas door
If so Pictures Pictures Pictures
Don
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
ok guys there is a gas door in the seat
can you see it know don't know how to turn this picture upright
Very nice idea
Very nice indeed.
I'm wondering how reliable this is in the long term.
Have you found the seat material has held over time with all the flexing ?
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
Very nice idea
Very nice indeed.
I'm wondering how reliable this is in the long term.
Have you found the seat material has held over time with all the flexing ?
I now have almost 11,000 miles on my bike and I use the gas door at every fill up
I do not even think about raising the seat
The seat looks the same and is just as strong as the day I modified it
Don
Now 2014 RT Limited Cognac
Was 2008 GS SM5
Don Garbarino
Cup Holder
GPS locking holder
Mud flap
Modified KNOTT grill
Phone holder and charger
Trailer hitch
Dual air horn
Auxiliary fuse box with relays
Heated clothing controller
volt/oil pressure gauge
Sequential signals in mirror
Tri Axis Handle bars
Baja Ron anti sway bar/heim links
shorty antenna
And many more
I noticed it right off... but you said stock seat not backrest on the stock seat
that may be why some missed it. Cool add on, and handy to have I make lots of them.
Dave
Originally Posted by garb55
tell me what has been modified on my 2014 stock seat
Hi Don
You beat me to the punch, I was just about to send your pictures to a fellow here wanting a gas door
he was going to put in a Jeep door or other but your idea is so much better.... and FREE...
I love FREE ..
Dave
Originally Posted by garb55
tell me what has been modified on my 2014 stock seat
for resurrecting this post...great idea and the way I'll do my RT...I kept looking at ideas with the hinged gas cap screwed to the seat, the auto closing screw on cap under that, etc. I'm feeling the warm fuzzies this mod brings...can't wait to get out the dremel and a new plastic cutting wheel
let's ride safe & be careful out there,
Mike in Nawlins'
2014 Black SE6 Limited "Charlotte"
New Orleans Ride Captain
Patriot Guard Riders
I think you all have way to much free time on your hands. Ride more
2015 RT SE6 LIMITED, Black
Tri Axis Handlebar,
Ultimate Mid Rider Seat with Fuel Door
F4 Wide Tinted Windshield, with Vent
Tric Led Mirror Signals
Stebel Nautilus Compact Twin Air Horn
there's no hinge, per se
the vinyl cover and inside foam act as the hinge
the plastic back is "scored" and broken so that piece of the side of the seat can then swing open
I pulled just enough staples loose from the seat cover to pull the cover out of the way to cut the seat pan with my dremel tool
it was probably 5 or 6 staples each side of the cut at the top and 3 or 4 each side on the bottom...I then used contact cement to reattach the cover to the hard plastic back
I did not cut the foam or the cover as they are the hinge
let's ride safe & be careful out there,
Mike in Nawlins'
2014 Black SE6 Limited "Charlotte"
New Orleans Ride Captain
Patriot Guard Riders