-
Very Active Member
Dash Mount System
Opps, I ran out of the Dash Mounts. I have more in production and they should be back in stock soon. I was quite unprepared for the volume of sales. I've also added the Ram short arm as an option and they will be in stock shortly. I just wanted to let everyone know I'll have them back in stock ASAP.
Thanks
JT
-
Very Active Member
The Dash Mount is back in stock. I've also added the Short Arm B-Socket to inventory.
rapb201a.jpg
Thanks
JT
Last edited by jthornton; 04-04-2014 at 05:55 AM.
-
I installed one on my 14 and have my phone, camera and radar detector mounted from it with ram mounts. I ran power up the windshield mount hole throught the dash which keeps things neat. I like it up high like that as it keeps my eyes up where they out to be not look down as is the case with the GPS. Great idea JT, thanks again.
By the way, I used two medium sized arms and one long one to get the phone closer and lower.
-
Originally Posted by bluestratos
I installed one on my 14 and have my phone, camera and radar detector mounted from it with ram mounts. I ran power up the windshield mount hole throught the dash which keeps things neat. I like it up high like that as it keeps my eyes up where they out to be not look down as is the case with the GPS. Great idea JT, thanks again.
By the way, I used two medium sized arms and one long one to get the phone closer and lower.
Any chance you can add a couple pics?
-
Originally Posted by Hog vert
Any chance you can add a couple pics?
click the highlighted "dash mount " (showed up in red type on my screen) , and it takes u to his site
-
I was hoping to see one in use.
Sent from my iPad using Tapatalk
-
If I have time when i get back to the office I will post some if i have them if not i can sen on Monday
-
Originally Posted by Hog vert
I was hoping to see one in use.
IMG_2036.jpg
-
-
Active Member
Garmin Nuvi attachment
Originally Posted by jthornton
Opps, I ran out of the Dash Mounts. I have more in production and they should be back in stock soon. I was quite unprepared for the volume of sales. I've also added the Ram short arm as an option and they will be in stock shortly. I just wanted to let everyone know I'll have them back in stock ASAP.
Thanks
JT
JT, Got anything that will work with the Garmin Nuvi ball attachment shown in the pics below? I believe the ball on these is smaller than a ram mount, correct me if I'm wrong. I like the placement of the bracket.
garmin nuvi.jpgNuvi 2.jpg
Thanks, RT
2016 RTS Special Triple Black, BRP Freedom Trailer, Spyder Pops Rear Lighting Kit, Spyder Pops Full view Turn Signals, Trunk Light, Rivco Highway Pegs. Doc's Spring Tensioners, Trunk Organizer, Magic Mirrors, Foam Grips, back to Stock Windsheild, Lamonsters cat delete, Bajaron sway bar, More Farkles to come !!
-
Very Active Member
Originally Posted by bluestratos
I installed one on my 14 and have my phone, camera and radar detector mounted from it with ram mounts. I ran power up the windshield mount hole throught the dash which keeps things neat. I like it up high like that as it keeps my eyes up where they out to be not look down as is the case with the GPS. Great idea JT, thanks again.
By the way, I used two medium sized arms and one long one to get the phone closer and lower.
Thanks, glad to know it fits the 14 too.
JT
-
Very Active Member
Originally Posted by Hog vert
Any chance you can add a couple pics?
Here is a photo of my eye phone in a Ram X Mount and a coily cord to the dual USB charging plug.
Dash Mount and Dash Power.jpg
JT
-
Very Active Member
Originally Posted by TexAmRider
JT, Got anything that will work with the Garmin Nuvi ball attachment shown in the pics below? I believe the ball on these is smaller than a ram mount, correct me if I'm wrong. I like the placement of the bracket.
garmin nuvi.jpgNuvi 2.jpg
Thanks, RT
The Ram Ball I stock is the "B" size or 1" in diameter. I'd bet Express Mounts has something to fit your Nuvi. About how big is the ball end? The "A" size is 9/16" in diameter. This is an "A" size threaded ball that will fit my Dash Mount System.
JT
-
The garmin ball is called a "g-ball" and is 17mm
Sent from my Venue 8 3830 using Tapatalk
-
-
-
Very Active Member
Originally Posted by Bob Denman
"g-ball"...
There's about a hundred jokes just waiting to get out...
But I fear the Ban Hammer!! The Ban Hammer.jpg
OK Bob. Keep it clean. Tom
Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?
2020 Petrol Blue Metallic RTL
-
IMG_1688.jpg
left mount is a 7" xGrip for an iPod mini - used only on long trips as a GPS
center is a GoPro mount
right is an xGrip for my iPhone
-
Very Active Member
Originally Posted by lookerjdc
left mount is a 7" xGrip for an iPod mini - used only on long trips as a GPS
center is a GoPro mount
right is an xGrip for my iPhone
Nice setup!
JT
-
Very Active Member
Anyone know of a place that sells the "G" size ball? or anything that will fit the Garmin Nuvi? I asked and Ram doesn't make a "G" size ball.
JT
-
Originally Posted by jthornton
Anyone know of a place that sells the "G" size ball? or anything that will fit the Garmin Nuvi? I asked and Ram doesn't make a "G" size ball.
See if this helps: http://www.gpscity.com/questions?qid=12926
-
Very Active Member
Originally Posted by bullant12
That looks like it will work. I'll get a few for my customers convenience.
Thanks
JT
-
Very Active Member
I added the Garmin Nuvi 600 series cradle and the matching Diamond Base B-Ball to JT's Spyder Store as an option to the Dash Mount System.
Thanks for all the help in sorting this out.
JT
-
Very Active Member
I had some fun today with my GoPro camera trying to sort out how it works while I was making Dash Mount Bars.
JT
-
Very Active Member
I just added a new option to the Dash Mount Bar, Chrome Powder Coating. Here is a batch cooling off right out of the powder coat oven.
Chrome DM-1.jpg
JT
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|