New 2013 RS-S SE5

[norcalskinzfan]

Hey all. Just picked up a brand new RS-S SE5 and love it, but it is taking some getting used to. I would like to start customizing by killing the rear cover / plate holder. I have searched for a mounting kit with light but have not had much luck. Only kits that are really pricey for just plastic. Can someone point me in the right direction?

Here is my new baby

spyderrs-s.jpg

Here is why it is taking a bit to get used to LOL

gixxer.jpg

[AbNormy]

Welcome! Congrats! Vendors here make all kinds of farkles...

Sent from my HTCONE using Tapatalk

[norcalskinzfan]

Welcome! Congrats! Vendors here make all kinds of farkles...

Sent from my HTCONE using Tapatalk

Thanks for the welcome I guess I could go through all of them, but was hoping to get assistance on which vendor offers the "farkle" I am after.

[AbNormy]

Drive an RT sorry...

Sent from my HTCONE using Tapatalk

[norcalskinzfan]

Drive an RT sorry...

Sent from my HTCONE using Tapatalk

Do you mean that you drive an RT and can't help? Forums are always so hard to read between the lines...

[Jeriatric]

What part of Cal ?

[norcalskinzfan]

What part of Cal ?

Thanks for the welcome I am in Hollister.

[Jeriatric]

Thanks for the welcome I am in Hollister.

Great little town.

[ARtraveler]

on your new ryde.

[Deanna777]

And on your new . Don't be shy on asking questions, we are here to help. Deanna777

[Riker]

Congrats.... won't take long Ride on!!!

[norcalskinzfan]

Congrats.... won't take long Ride on!!!

^^THAT^^ Where can I get that fender delete? Looks AWESOME!

[coz]

welcome. search through the my mods pages. you'll find all kinds of rear fender/delete options, plus tons of other cool mods.

[norcalskinzfan]

welcome. search through the my mods pages. you'll find all kinds of rear fender/delete options, plus tons of other cool mods.

Sorry, I am new here... How do I do that? NM.. It is a topic... Thanks

[coz]

click on forums at upper left of this screen. scroll down to my spyder mods. click on it. have at it.

[billrob71]

Congrats on the new ride, I have not taken mine off but they unbolt pretty easy. BRP has a new sport fender kit for the 2014 that will fit 2013 that comes off the pan under the seat that houses the light for the tag and raises the tag . Other then that you can mount the tag like riker did and mount one of the small led strips over it to light up the tag

[norcalskinzfan]

click on forums at upper left of this screen. scroll down to my spyder mods. click on it. have at it.

Thanks coz I guess since the search did not reveal anything and it would take months to search through that topic it is back to Google for me...

[billrob71]

Here's the new sport fender on a older bike

http://www.spyderlovers.com/forums/s...nder-Installed

[norcalskinzfan]

Here's the new sport fender on a older bike

http://www.spyderlovers.com/forums/s...nder-Installed

Thanks Billrob! This is the only one that I found and it is $300 for a couple reflectors and a plastic piece. In the sport bike world there are fender delete kits or plate relocation kits that are relatively inexpensive. I do like the look of that one, but I just can't justify the cash.. I do appreciate the help though

[dndfindley]

Thanks Billrob! This is the only one that I found and it is $300 for a couple reflectors and a plastic piece. In the sport bike world there are fender delete kits or plate relocation kits that are relatively inexpensive. I do like the look of that one, but I just can't justify the cash.. I do appreciate the help though

One thing you will find out about Spyders and that is nothing about them is inexpensive. Whether it is worth the expense is a matter for discussion.

[jerpinoy]

and Farkles are available om most of our sponsors.

[ssmcclub]

Good luck with it , You are going to love it,It dose take some getting use to it. I have 250 miles on my 2014 rss came off a 1999 hayabusa so I know what you mean, ride it like a snowmoble not a motorcycle and you will be ok

[Riker]

Thank you

Actually it is an easy mod:

1. Remove rear fender and bracket
2. Purchased a motorcycle license holder off of Ebay, and some license plate bolt lights
3. Work the license plate wiring back into the bike. You will then reroute it near where you will install new mount ( I tapped it )
4. Remove the under plate ( above rear tire ). Drilled 3 holes...2 for mounting and one to feed power for lights
5. Install mount and lights, then re-install plate
6. Need to be careful of license plate hitting rear tire. Bent mine back a little and stiffened rear shock. If 2 up, be aware

I also think the look is awesome. Enjoy your new ride. There are many things you are going to be doing to it

^^THAT^^ Where can I get that fender delete? Looks AWESOME!