-
Ordered my ST bars and will do the swap this weekend!
-
parts list
Originally Posted by packbuckbrew
Ordered my ST bars and will do the swap this weekend!
packbuckbrew-others-Do you have a parts list for this conversion?
Is it all the ST handle bar parts in the diagram "ST" box from BRP?
Does any seller sell it as a package?
Best place to buy? Forum supporting venders?
Thanks
-
Originally Posted by mudcruiserman
packbuckbrew-others-Do you have a parts list for this conversion?
Is it all the ST handle bar parts in the diagram "ST" box from BRP?
Does any seller sell it as a package?
Best place to buy? Forum supporting venders?
Thanks
You'll need to order the following parts from a BRP dealer.
(1) #115 comes in black or silver
(1) #94
(1) #95 SM5, #92 SE5
(2)#4
(4)#5 if you want to put new mounting bolts.
-
RS To ST Handelbar swap
Thanks for the handlebar swap info , I ordered mine today from my dealer and the part manager was surprised that the ST would fit, I've also ordered floor boards fro ISCI, I'll let you know how I make out.
Thanks again
-
-
2013 RS to ST Spyder handelbar swap
Just finished replacing 2013 OME RS handlebar's w/ ST bars, everything fit good, a couple tips if swapping bars, watch for a 3/16 x 3/4 " +- spring when taking the ignition apart ,--- be careful when taking the trunk & seat cables off from under the bars , maybe ( lubricate a bit before removing especially if you end -up removing them a few times ) --- the left plastic cover that goes under the new ST bars has a split on one side (it is supposed to be there according to my dealer (its not broken)
FYI -- Also finished installing new floor boards , not exactly a great experience , cost more the web site stated, got different design than ordered, two small important screws missing & to top it off they supplied the wrong instructions.
-
ST Bars
Thank You!!. Is BRP the only ones that sell the ST Bars? What is the difference between the Stock and the ST Bars. Do bring them closer to you, like the risers?
-
Hi,
I'm doing the swap. Where does the little spring go? My spring fell out when I took the ignition switch apart.
Thank you for any help that you can give.
Al Schroeder
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|