Results 1 to 10 of 10
  1. #1
    Very Active Member Copperman's Avatar
    Join Date
    Mar 2013
    Location
    Maumelle, AR
    Posts
    2,151
    Spyder Garage
    2

    Default What carries over from the 2013 RTL to the 2014 RTL?

    Does anyone know if an aftermarket seat (Ultimate) for a 2013 RT fits on the new 2014 RT? How about Bajaron's sway bar?

    I'm just kicking things around.
    2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
    2020 RT Limited , Chalk

  2. #2
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default Don't know..!!

    you could check with the folks on the home page that deal with them. Don't know if anyone has reached the point of changing things out already seeing as many have them but can't ryde them...egine, suspension, and electrical seem to be the big changes on the RT. Rest assured they will have those items soon if not already...
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black

  3. #3
    SpyderLovers Sponsor
    Join Date
    Jun 2010
    Location
    Las Vegas
    Posts
    13,031
    Spyder Garage
    0

    Default

    The sway bar is a definite yes and it is my understanding that the seats also fit

    2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
    2014 RTS-SM6 123,600 miles Sold 11/2017
    2014 RTL-SE6 8,600 miles
    2011 RTS-SM5 5,000 miles
    2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
    2010 RTS-SM5 59,148 miles
    2010 RT- 622

  4. #4
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,273
    Spyder Garage
    8

    Default

    Very good question.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

  5. #5
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    Yes, and ditto!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  6. #6
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    If you are going from the same model to the same model.

    Sway bar = Check With Baja Ron, you may need to add the collars.

    Seat = Yes

    BRP adjustable Air Vents = Yes

    NBV Highway Pegs = Yes

    Bump Skid = No (new Design)

    Cup Holders = Yes

    Floorboards = Yes

    WindShields = Yes

    IPS Key Holder= Yes

    Trailer Hitch = Yes

    Wiring Module = ???

    Drivers Back Rest = Probably Not

    Rear Rack = Yes

    did i miss anything??

    Girlfriend = Who Knows

    Cruzr Joe
    Last edited by Cruzr Joe; 02-15-2014 at 07:06 PM.
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  7. #7
    Very Active Member Highwayman2013's Avatar
    Join Date
    Nov 2012
    Location
    North Las Vegas, NV
    Posts
    4,561
    Spyder Garage
    1

    Default

    Joe, I think you said the adjustable wind deflectors fit with different screws too.
    2016 F3 Limited
    2019 Ryker Rally
    2014 Suzuki V Strom 650
    2020 CSC TT 250
    2016 F 3 Limited , Vegas White

  8. #8
    Very Active Member Purple Guy's Avatar
    Join Date
    May 2013
    Location
    Edmonton Alberta, Canada
    Posts
    1,874
    Spyder Garage
    1

    Default

    I know Ron made some adjustments to the sway bar for the added weight of the new engine.
    2014 RT-Ltd , Cognac

  9. #9
    Very Active Member Cruzr Joe's Avatar
    Join Date
    Jul 2012
    Location
    Bryant, Arkansas
    Posts
    10,146
    Spyder Garage
    0

    Default

    Quote Originally Posted by Highwayman2013 View Post
    Joe, I think you said the adjustable wind deflectors fit with different screws too.

    You are correct, but i think i used the wrong screws the first time, the screws that come with them are the correct ones.

    Cruzr Joe
    2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer

  10. #10
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    The air deflectors transplant just fine... if you use the proper screws!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •