-
Very Active Member
What carries over from the 2013 RTL to the 2014 RTL?
Does anyone know if an aftermarket seat (Ultimate) for a 2013 RT fits on the new 2014 RT? How about Bajaron's sway bar?
I'm just kicking things around.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Very Active Member
Don't know..!!
you could check with the folks on the home page that deal with them. Don't know if anyone has reached the point of changing things out already seeing as many have them but can't ryde them...egine, suspension, and electrical seem to be the big changes on the RT. Rest assured they will have those items soon if not already...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
The sway bar is a definite yes and it is my understanding that the seats also fit
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
-
Yes, and ditto!
-
Very Active Member
If you are going from the same model to the same model.
Sway bar = Check With Baja Ron, you may need to add the collars.
Seat = Yes
BRP adjustable Air Vents = Yes
NBV Highway Pegs = Yes
Bump Skid = No (new Design)
Cup Holders = Yes
Floorboards = Yes
WindShields = Yes
IPS Key Holder= Yes
Trailer Hitch = Yes
Wiring Module = ???
Drivers Back Rest = Probably Not
Rear Rack = Yes
did i miss anything??
Girlfriend = Who Knows
Cruzr Joe
Last edited by Cruzr Joe; 02-15-2014 at 07:06 PM.
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Joe, I think you said the adjustable wind deflectors fit with different screws too.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
I know Ron made some adjustments to the sway bar for the added weight of the new engine.
-
Very Active Member
Originally Posted by Highwayman2013
Joe, I think you said the adjustable wind deflectors fit with different screws too.
You are correct, but i think i used the wrong screws the first time, the screws that come with them are the correct ones.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|