Ordered a kit I found on ebay and got it installed yesterday, looks good I think. Couldn't get the temps in the garage warm enough to install so I removed them and kept them inside for a week to adjust to temp. I will wait till better weather before reinstalling them.
Former Spyders
2010 Blue RT A&C SE5 53K plus miles - never left us stranded!
2013 Pure Magnesium Metallic ST SE5 11K plus miles - never left us stranded!
Ordered a kit I found on ebay and got it installed yesterday, looks good I think. Couldn't get the temps in the garage warm enough to install so I removed them and kept them inside for a week to adjust to temp. I will wait till better weather before reinstalling them.
So is the wrap clear so the color of the Spyder comes through or is the entire wrap already colored?
So is the wrap clear so the color of the Spyder comes through or is the entire wrap already colored?
The entire wrap is printed with the graphics so everything is covered except the edges and seems. The hood (frunk) is a 4 piece set and the rear trunk is 5 pieces if this was one piece it would be very hard to install. The best way to install is to wet the surface and the back of the decal then apply and work the water out from under them to make them stick. This works good so you can get them into perfect alignment before they are stuck. Took me about 2 1/2 hours to do both pieces.
Wow, that looks really, really nice! Maybe I'll have my Spyder wrapped. But I sure wouldn't do it myself. I can't even put a screen guard on a cell phone without wrinkles. Anybody know of anybody in Phoenix area that can install these wraps nicely?