Results 1 to 3 of 3
  1. #1
    Registered Users
    Join Date
    Dec 2013
    Location
    Narangba Nth of Brisbane Queensland Australia
    Posts
    4
    Spyder Garage
    0

    Default Removal of Sports Rack on 2013 ST Limited to access seat bolts.

    Just picked up a Demo ST with rack all ready fitted. Need to remove it to take off the seat to fit a riders backrest. Removed the four bolts under the lid on top and one screw holding the splash guard underneath. the whole rack is loose but I do not know how to disconnect the cable assembly which seems to be stopping the final removal of the rack. Do you have to take the splash guard completely off underneath to access the cable to disconnect? Any help would be appreciated.

  2. #2
    Active Member Colin's Avatar
    Join Date
    May 2011
    Location
    Karaka NZ
    Posts
    438
    Spyder Garage
    1

    Default

    Have you removed the 2 hex head bolts that hold the bottom cover under the sport rack. Hard to explain it, but if you run your fingers along the underside of each side of the sport rack you should locate them, once you remove that cover the cable will be easy to remove.
    I hope this helps.
    We now have His and Hers Spyders.
    Current Spyder, 2015 F3 Steel Black, Passenger Backrest, Blue Ridge Screen with Xcreen Extention, Akrapovic Muffler, Attitude Handlebars, Blades front rims, RT Swaybar,
    Her Spyder 2011 Magnesium RSS Sportrack and Backrest, Comfort Seat, Grip Puppies, 3.5 inch Riser Bars, Wespyd Signature Swaybar. Hindle Muffler, Godiva Screen, Hiway Pegs Can Am Panniers

    Previous Spyders
    2013 ST SM5
    2011 RSS
    2010 RS
    2015 F3 , Black with Blue Graphics

  3. #3
    Very Active Member
    Join Date
    Mar 2012
    Location
    NJ
    Posts
    3,459
    Spyder Garage
    0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •