New Exhaust for 2010-2013 RT's

[Mooseman]

Hi Members, I just installed a 6" Cannon Exhaust for the CanAm RT. Bolts right up to the catalytic converter on this one and he will also be making a "Y" pipe catalytic converter replacement pipe. The sound is Awesome! A nice low bass with a good rumble. Quite a bit louder than the stock but not ear shattering or neighbor bothering. lol I can still hear the radio with no problems or did I have to increase the volume any. The muffler is all chrome with a machined scalloped end cap and the exhaust pipe from the muffler to the cat is Stainless Steel. I have noticed a very nice increase in Low end torque so far. The engine winds up much easier and I notice I can shift into 5th at a respectable 45 mph without any lugging at all ( 1 up ) I haven't tried two up yet. The wife doesn't care for the cold too much. From 5000 rpm and up I can't really tell yet. The sound is Awesome (and I'm older) and the fit and finish is excellent! The system is all hand made and comes from Taiwan PM me for details.1384792855059.jpg1384792830243.jpg1384792821106.jpg1384792769976.jpg1377377873281.jpg
100%

0%

[Bob Denman]

Is there any chance of hooking us up with a video that'll give everybody an idea of how it sounds?

[Mooseman]

Yes Bob, I will post a sound byte and short video later tonight or tomorrow (once I figure out how to do that) lol

[RBS66]

Where did you purchase it from? Looks really nice.

[Mooseman]

Is there any chance of hooking us up with a video that'll give everybody an idea of how it sounds?

Hi Bob I posted a video on you tube. The video on is our forum also. Not the best sound (cheap phone) but you will get the idea.

[Showie]

Best I've heard on computer

[Barlock]

Very nice. Do you plan to install some protection for a passenger right foot?

[Mooseman]

Very nice. Do you plan to install some protection for a passenger right foot?

Don't feel that's really necessary. My wife is the only person that rides with me (other than the wiener dogs, but their legs are too short lol) and they ride up top in a pet seat. The passengers right foot is far enough away from the exhaust to harm them or the exhaust.

[Bob Denman]

That DOES sound sexy...

[Chupaca]

good sounding. Looks great, good to know there are more choices out there for those looking for a little more on their RT's. Nice pic's and video...

[IntoTheWind]

Really brings to life the Can Am, need info -- where to purchase and price etc?

[bmwlarry]

Mooseman

We need more info on availability and pricing. A video of it on road during a ride by would be great!

[M109Dreamer]

That pipe looks like a pipe Rainey from Taiwan makes for the M109. So where can we get one?

Sent from my SCH-I545 using Tapatalk

[spacetiger]

Pricing? Looks like it has a flange bolt up, does it require any welding on the pipe from the cat?

Jerry

[TexasSpyder]

Is there a link to the video, would like to hear it too?

J. D.

[Magdave]

Is there a link to the video, would like to hear it too?

J. D.

Click on it in the first post

[TexasSpyder]

I always click on 1st unread which skips the original post. Guess I better learn to check the 1st post.
Thanks

J. D.

[Highwayman2013]

Sounds good, looks nice. How much and where do we get one?

[dancote]

I don't subscribe to the "Loud pipes save lives" mantra and have always kept the stock pipes on all my previous bikes (Harleys included). But ... I'm sorely tempted. This pipe looks so much better than stock and the sound is just right. As others have said in this thread, please post more info on availability, pricing, cat-delete.

Regards,

Dan

[Bob Denman]

Dan, with you 100%... this one sure is tempting!

[Mooseman]

Bump

[maww12]

I'm tempted also! I don't care for the stock sound but all of the aftermarket ones I have heard make my ears bleed! Much too loud for my liking. This one sound just about right but sure would like to know more about it. Like where to find and how much, will it make the engine run leaner or have any effect on nanna Don't wanna piss her off.

[TexasSpyder]

PM Mooseman he will fix you up on info.

J. D.

[crazyspyder]

at 900 buckaroos AND made in TAIWAN.....aaahh.....no thank you! having better luck with 45$ car mufflers.

[Mooseman]

Should have an update this week from my friend on the "Y" Pipe cat eliminator..