-
SpyderLovers Founder
-
Registered Users
2013 ST-S SE Pure Magnesium
-
Thanks for the quick responses.
-
Followed the Lamonster directions and now I have foglights...WOOHOO
Great directions made the job quick and painless.
-
Last edited by dave01; 06-22-2009 at 05:35 PM.
-
Registered Users
-
Very Helpful Member
Anything else happening when the engine shuts off like the display going dead or scrolling an error message? Not owning or even helping to hook up a set of fog lights, I'm only guessing at what might be wrong. All I can figure is that something in that fog light harness got tied into something it wasn't supposed to as the headlights and fog lights are fused (and wired) separately from things that would control the engine.
Last edited by bjt; 08-22-2009 at 12:20 PM.
Former Happy Spyder Owner
Just decided it was time to move onto other things.
-
Very Active Member
-
Very Active Member
I bought a used 2009 SE5 Spyder with fog lights already on it. They worked when I purchased it,but now it blows the 10 amp fuse the second I press the fog light switch. I took off the panel under the switch,wiggled wires,and traced them to a square box in series with the switch and fog light.Anyone know what this is? I read here earlier to put in a 20 amp fuse?..
-
I know that this starts off talking about install on a RS.
I still have a question about aiming fog lights on a 2010 RT - last weekend while installing the hand brake I looked at the foglight and pulled the cover that is over the connector to the bulb, and I could not see any way to adjust the aim on the fog lights on the RT.
Any help would be appreciated.
My right fog light is aimed too high.
BTW - I had the dealer install my fog lights - was charged an hour and a half labor.
-
HELP!!! BRP Foglights on Miss Daisy...but
Well, had the day off and went thru the exercise. HOWEVER, have all back together and NO HEADLIGHTS OR FOG LIGHTS.
Suggestions? I already pulled the 30A Maxi Fuse and replaced it on suspicion.
-
makes me want to run out buy the fog light kit and get down and dirty !!!! But looking at the suggestion sorta you would get the HID kid you have to make install easier correct ? I am like you winter time means playtime and tearing stuff apart to make it better or different !
-
Registered Users
-
Minor correction to Lamont's excellent procedure. "Drill a 17/32" hole real close to 7/16" ". 17/32" is actually just a 32nd over 1/2". Not a common bit size so I used a 1/2" and 'reamed' just a tad.
Now off to study schematics and see where I lost power for the headlamps etc.
-
SpyderLovers Founder
-
BRP Fog Lights Install Lamonster Style
Here it is June 21, 2013 and I just finished my install of the fog lights on my 2008 Syder RS. I found your pictures and instructions extremely helpfull. I also used the BRP instructions. It took some time, but you save some money. While I had everything apart I put in HID lighting in the fog lights with an aftermarket kit. Thank you so much for having these do it yourself threads
-
Member
Bought a set but have no switch. Any idea how to wire to headlights or another switch to use ??? Wife is already on my ass to get it done.
Keep your wheels down and your head up
Be safe and ride hard
-
Originally Posted by Hoodrich13
Bought a set but have no switch. Any idea how to wire to headlights or another switch to use ??? Wife is already on my ass to get it done.
Hi and welcome to spyderlovers, this thread was started a long time ago so it might serve you better to post a new thread. Be sure to include the year and model of your Spyder so people will know how to help you. Maybe include information on what lights you bought-who is the manufacturer.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|