-
Yamaha of Lumberton
Has anyone in North Carolina used Yamaha of Lumberton for any of their Spyder needs? I am thinking about them for service on my Roadster.
-
Originally Posted by Wiredux
Has anyone in North Carolina used Yamaha of Lumberton for any of their Spyder needs? I am thinking about them for service on my Roadster.
Their long time tech quit last month. They are training a new one. You are better off going to Columbia they have the only Platinum dealer around.
-
I use RPM Cycles in Ablemarle NC. Great service and great people.
http://www.rpmcyclesnc.com/
-
Originally Posted by danlnc
Looking more east. Charlotte area is 4.5 to 5 hours for me.
-
Originally Posted by Magdave
Their long time tech quit last month. They are training a new one. You are better off going to Columbia they have the only Platinum dealer around.
I switched to using Yamaha of Lumberton after the dealership where I made my purchase closed (Alpha Powersports)
I could not be happier, the guys in Lumberton have been great.
Have not heard about their tech quitting....Are you referring to Billy?
-
Originally Posted by 2Gunns
I switched to using Yamaha of Lumberton after the dealership where I made my purchase closed (Alpha Powersports)
I could not be happier, the guys in Lumberton have been great.
Have not heard about their tech quitting....Are you referring to Billy?
Not sure what his name was. I was going to go there for my 600mi service and called and they told me their tech had quit but they were training a new one. About 1 1/2 months ago. I ended up going to Velocity in Charleston. Columbia Powersports is the only Platinum dealer in SC all the rest are gold.
-
Originally Posted by Magdave
Not sure what his name was. I was going to go there for my 600mi service and called and they told me their tech had quit but they were training a new one. About 1 1/2 months ago. I ended up going to Velocity in Charleston. Columbia Powersports is the only Platinum dealer in SC all the rest are gold.
Hate to hear this... Lumberton was only 30 minutes away for me....I may have to give RPM a try even if it is 1 hour+ (heck..sounds like a good excuse to ryde).
Where in SC are you Magdave?
-
Very Active Member
You might want to consider Winston-Salem; two techs there, both been there quite a while. One at least 6 years. I've had excellent service with them. Kevin is the svc mngr, Brad and Steve are techs.
PS: and you can watch while they do the work!!!!
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
Thanks for all of the replays. Nice most of the dealers are well over 2 hours away it looks like I am going to have to stick to my current one.
-
Originally Posted by 2Gunns
Hate to hear this... Lumberton was only 30 minutes away for me....I may have to give RPM a try even if it is 1 hour+ (heck..sounds like a good excuse to ryde).
Where in SC are you Magdave?
Conway and you?
-
Active Member
I live 15 minutes from the Winston-Salem shop, but prefer going to RPM Cycles. Never done me wrong. Tech knows his stuff.
2014 Cognac Spyder RT-S SM6, purchased July 8, 2015
Rivco Flag Holders
Eduo Innovations SRT Clear/Stainless Cup Holder
Lamonster Spyder Decals
Inspector Gadget Driver Floorboards and Heel-Toe Shifter
Sena SPH10H-FM Headset for Half-Helmet
Hopnel 1500 Front Trunk Liner
BRP Trailer Hitch and Control Module
2014 Escape Trailer (Black and Diamond) from 1 Motorcycle Trailers
2012 Magnesium Spyder RT SM5, sold on July 8, 2015
-
Dan, you're in the same boat with me. Almost three hours to Albemarle for me and almost 4 for you. Brewers Cycles would be about 3 hours for you. It's an hour and 45 for me.
-
I found a fix for this. I'll just do it myself. Time to get educated.
Sent from my iPad using Tapatalk HD
-
There's a dealership in Fayetteville, nc now.
Sent from my SM-G925V using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|