-
04-01-2014, 05:28 AM
#326
Very Active Member
Originally Posted by flamingobabe
Jacque....the first listed is 250000079...not 69.....second listed torx bolt ...you need 4 of them.....these prices are really cheap.............
Beng and I have both ordered the 69 parts
Being's are on his bike, mine are in route.
-
04-01-2014, 07:24 AM
#327
-
04-01-2014, 08:04 AM
#328
Very Active Member
-
04-01-2014, 08:42 AM
#329
-
04-01-2014, 09:24 AM
#330
Active Member
Thank you ...
Originally Posted by flamingobabe
Jacque....the first listed is 250000079...not 69.....second listed torx bolt ...you need 4 of them.....these prices are really cheap.............
Thanks Charlyne, I'll definitely order 4 what about the clips? Only 1? The price is good isn't it ... I love Spyderlovers - I learn really great things, like where to get these items for such a great price.
-
04-01-2014, 10:48 PM
#331
Very Active Member
Originally Posted by Bob Denman
The 2013 RS bikes didn't get the heat complaints that the STs did...
Your correct Bob with the exception of some of the heat from the catalytic converter heat coming up through the vents mine really isn't too bad. Not bad enough to justify spending $700 on new panels plus the cost of having them painted , the new cat bypass that's coming may be a win win as far as heat and performance so think I'd try that first at least for my case.
-
04-01-2014, 11:41 PM
#332
Active Member
???
Originally Posted by billrob71
Your correct Bob with the exception of some of the heat from the catalytic converter heat coming up through the vents mine really isn't too bad. Not bad enough to justify spending $700 on new panels plus the cost of having them painted , the new cat bypass that's coming may be a win win as far as heat and performance so think I'd try that first at least for my case.
New CAT Bypass ?
-
04-02-2014, 12:27 AM
#333
Originally Posted by JacqueTanis
New CAT Bypass ?
Yes, a new project soon to be released by Lamonster.
-
04-02-2014, 03:56 AM
#334
Air flow and bugs!
Originally Posted by SNOOPY
Don't cover them and you will get more air flow.
If bugs go in there your Spyder will just eat them!
You're right, Snoopy, the air flow is more important than the bugs! Will keep them open without any covers. Just thought it would look neater with the other air intakes all covered with the steel mesh inserts that I installed. But I'm really happy with the results and hope that any heat problems will be now resolved. Best from Bavaria! Rick
-
04-02-2014, 01:50 PM
#335
Very Active Member
Originally Posted by JacqueTanis
New CAT Bypass ?
Lamonster is making a Y pipe to eliminate the catalytic converter. The converter creates back pressure and a lot of heat so taking it off helps both
Bill
2013 RSS Neutron Green
BRP HID's and Fogs
Custom Belt Tension
2014 side panels
HMF Exhaust
K&N air filter
Bajaron sway bar and links
-
04-02-2014, 01:52 PM
#336
Active Member
Originally Posted by billrob71
Lamonster is making a Y pipe to eliminate the catalytic converter. The converter creates back pressure and a lot of heat so taking it off helps both
Will it void my warranty? It's good until 2018!
-
04-02-2014, 01:56 PM
#337
Very Active Member
I don't but looking at my RSS pretty easy to take on and off , so if any problems I'll put mine back on
Bill
2013 RSS Neutron Green
BRP HID's and Fogs
Custom Belt Tension
2014 side panels
HMF Exhaust
K&N air filter
Bajaron sway bar and links
-
04-02-2014, 04:38 PM
#338
Very Active Member
In my parts I ordered PowersportsWarehouse called me back and said the part ending in 69 is not available...so I had it changed to the 79 part number just in case....only thing that gets me is that 69 is bolts, and 79 is nuts?
-
04-12-2014, 03:43 PM
#339
...in the pink (Girls On Spyders)
well the first delivery came today.....1 bolt, 2 packages of clips, 2 different trims, 2 foam for panels.,...waiting...6 days before we leave for Spyderfest....I don't think I'm thinking straight....we have 12 days until we leave for spyderfest...just too excited
Last edited by flamingobabe; 04-12-2014 at 10:16 PM.
#IamARyder #RideASpyder #CanAmSpyder
-
04-12-2014, 06:16 PM
#340
Active Member
Yayyyyyy ....
-
04-12-2014, 06:26 PM
#341
-
04-14-2014, 07:55 PM
#342
Active Member
New Panels
Has anyone been to the BRP site and seen the new part number for new panels? They are 499.99. Is that the whole kit or do you need more parts to completely fit the new 14 panels???? Thanks and I am glad I found this group!
14 RT-S , Stock Large brake pedal White Pearl
-
04-14-2014, 08:08 PM
#343
Registered Users
Originally Posted by NM Wrench
Has anyone been to the BRP site and seen the new part number for new panels? They are 499.99. Is that the whole kit or do you need more parts to completely fit the new 14 panels???? Thanks and I am glad I found this group!
For which model the ST?
-
04-14-2014, 08:20 PM
#344
Registered Users
Originally Posted by Five-O
For which model the ST?
I believe the one you're referring to is for the ST. It consists of matte black panels for: trunk lid, panel below headlamp/mirrors, tail piece and front fender accents.
-
04-14-2014, 09:01 PM
#345
Side Panels
I just got my 2013 ST Limited 3 weeks ago. It's not been above 65 here and the left side panel is already getting hot. Any suggestions on what to do????
-
04-14-2014, 09:42 PM
#346
Active Member
How you guys getting so much lower prices, I just priced mine out at $922 at BRP is Powersportswarehouse that much cheaper? Please advise
Originally Posted by SNOOPY
That looks right, except the first number I have is 69, not 79. Not sure the difference.
My subtotal from Powersportswarehouse was $703, not sure how you came up w $545?
Also, I put in their code for free shipping over $299 and it worked.
.
-
04-14-2014, 10:22 PM
#347
Active Member
-
04-14-2014, 10:32 PM
#348
Active Member
Originally Posted by Barbie
I just got my 2013 ST Limited 3 weeks ago. It's not been above 65 here and the left side panel is already getting hot. Any suggestions on what to do????
Wrap, silicone and tent wrap your exhaust, Heat Shield your Oil Reservoir, tubing and panels (pay attention to shielding the screws as well). Use Engine Ice in your coolant. Then replace the panels on your 2013 with the new 2014 Air Flow Panels at Powersportswarehouse.com Here's your parts list for the white panels - you may have to change the numbers depending on the colors you want:
Part # Description Qnty
250000079 Panel Nut M5 X 0.8. Model-ST 1
250000577 Torx Screw K40 X 12 4
517302785 Clip 1
704903140 Can-Am Decal for White Model 2 (?)
705007329 LH Upper Side Panel 1
705007330 RH Upper Side Panel 1
705007700 Vegas White Pearl LH Front Panel 1
705007706 Vegas White Pearl RH Front Panel 1
705007737 Vegas White Pearl LH Upper Side Panel 1
705007738 Vegas White Pearl RH Upper Side Panel 1
518327600 LH Upper Side Panel Foam 1
518325518 RH Upper Side Panel Foam 1
You will need the 2 decals this is for white…look up the black….. paint touch says 2013 and 2014 same ... pearl white
http://www.powersportswarehouse.com
-
04-14-2014, 10:36 PM
#349
Active Member
Originally Posted by flamingobabe
well the first delivery came today.....1 bolt, 2 packages of clips, 2 different trims, 2 foam for panels.,...waiting...6 days before we leave for Spyderfest....I don't think I'm thinking straight....we have 12 days until we leave for spyderfest...just too excited
How many clips do we need Flamingobabe?
-
04-15-2014, 05:44 AM
#350
Very Active Member
Originally Posted by SNOOPY
UPS drops it off at my house.
Lol
Will do.
Still waiting on my order, apparently some pieces have been on back order.
.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|