|
-
Registered Users
 rs license plate bulb
im trying to figure out what size bulb goes in the license plate mine busted and i couldnt see the numbers on it so I've tried 63 and they will only last a day ive been through 2 packs of them 
im planning on getting the custom fender that matches my corbin saddle bags but until then i need to figure out something
-
Very Active Member
My shop manual lists it as a 10w bulb; no other specs mentioned for it. Good luck.
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
Registered Users
Just ordered a couple from my dealer.
Not sure what size it might be other than small but I got a part number for you:
415129261
$2.95
Damon
2009 RS SM5 13,000 mi
2014 Yamaha FZ-09 110 mi
-
Registered Users
yeah i looked it up on the can am site was hoping to get a number from there so i could pick one up at the auto parts store
im thinking theres other issues with it because they only last a day
-
Very Active Member
Here's what you do..!!
take the bulb to the auto parts store. They will match it up. Can't remember the number but I know they have them for under a buck...!! 
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Registered Users
it takes a little digging through the schematics, but you can find any OEM part number you need at www.cheapcycleparts.com search by your make model and year, and they'll have the OEM schematics ready on the site.
-
Very Active Member
2018 F3 S, BRP SS Grill, Spoiler, Attitude Bars, #1 linkage kit, Chopped R Fender, TBR S1R slip On exhaust, Elka Stage 2 R Shock, Shad saddlebags
-
Registered Users
Same problem
 Originally Posted by Yammerdoodle
yeah i looked it up on the can am site was hoping to get a number from there so i could pick one up at the auto parts store
im thinking theres other issues with it because they only last a day
Probably is some other issue, but I didn't have a whole lot of luck with that bulb either. Too much vibration for the bulb filament to last very long. Recommend trying to mod to LED light or I've heard someone manufactures an LED bulb that fits in the socket, but couldn't find them in the semi-small town I live in.
A VERY HAPPY  RIDER!
Even duct tape can't fix stupid - Cody Stell
'08 Yellow SM5, 2" BRP handlebar riser, Super Trapp exhaust, sport rack, seat back.
Future wish list of updates, too numerous to list and too expensive to afford....and I just found Corbin.
-
Registered Users
Lots of banging around going on with that particular light. When I had this issue one of the things I was considering was using a couple LED plate bolt lights. So then if the stock bulb breaks again, you still have the two bolt LEDs.
http://www.amazon.com/BestDealUSA-Mo...ate+bolt+light
I dont think adding LEDs to that particular circuit would bother the nanny. Someone correct me if Im wrong please.
Last edited by daltmeyer; 09-23-2013 at 05:28 PM.
Damon
2009 RS SM5 13,000 mi
2014 Yamaha FZ-09 110 mi
-
Very Active Member
I just put a new one on mine, Auto Zone Sylvania bulb # 631, 2 bulbs for $2.95
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
RS - 55K+ miles, F3 - 200 miles and counting. 
Good advice!
