tire pressure monitoring

[harrypottar]

I have there 4wheel model from my old Goldwing, bike plus trailer.

I put the two trailer caps on the front wheels and one of the bike caps on the rear works fine.

they have a spyder model out now, just the LCD is different, want them to make spyder plus trailer 5 wheel system

harry
live from the uk

[gary lester]

Thanks for the come back and I just off the phone with a buddy who owns a Goldwing and he says you can use any number any where you want just remember which one is where. Thanks Gary

[Bob Denman]

Harry,
How accurate is that system...(Comparing it to the BRP's supplied gauge), and were there any issues with the balance of the tires?

[finless]

Harry,
How accurate is that system...(Comparing it to the BRP's supplied gauge), and were there any issues with the balance of the tires?

BRP's supplied gauge?
What is that and should it come with the Spyder?

Bob

[1VENOM]

BRP's supplied gauge?
What is that and should it come with the Spyder?

Bob

Check your tool kit, should be in there.

[CurtG]

Check your tool kit, should be in there.

It is in the tool kit but the battery was DOA I've been using a digital one that seems accurate and repeatable.

Ride safe,

[Bob Denman]

Check your tool kit, should be in there.

You DID find the tool kit; didn't you?

[samewok]

I have TPM monitors that are made for the can am. They work great and do not cause a balance issue. The company is www.Tpms.ca. There are about two hundred plus shipping.

[finless]

You DID find the tool kit; didn't you?

OK I knew where the tool kit is but never took it out and looked inside as I have my own tools.

So I found the digital pressure gauge. However does this thing work properly?
I tested it and found the following issues

1) It reads about 2 PSI higher than my "pen style" analog gauge. So which is right? As confusious says "Man with too many pressure gauges never knows the correct PSI"

2) If I hold the gauge on the stem, the readout keeps climbing! WTH is up with that? I held it on my front tire and it kept climbing to 37 PSI before it stopped increasing!

Am I doing something wrong using this thing or is it just a POS?

Bob

[Topshotta]

Harry,
How accurate is that system...(Comparing it to the BRP's supplied gauge), and were there any issues with the balance of the tires?

Bob,
i think they were referring to this http://www.cruisercustomizing.com/sh...rt/BBP-13-316A
not the one that comes in the spyder tool kit

[cjackg]

Bob,
i think they were referring to this http://www.cruisercustomizing.com/sh...rt/BBP-13-316A ....

I have been using the TireGard Trike system for a couple of years on my RTs. Works great and no tire balance issues. The remote control vibrates if the pressure in a tire drops below the programmed level. I think there are some cheaper systems around but this one is very well made and reliable.

TireGardTrike.jpg