Finally got my LED's from ledlightsworld (Hong Kong) took 3 weeks to get here but now I m glad. They look nice going around trunk.
2013 RT-S se5, C/D HMT third tail light( r/b/t), Ram Cup holder, TRICLED front fender LED's (r/t), C/D Bright sides (r/t), Bajaron sway bar and metal heim links, TRICLED mirror turn signal LED's, ISCI tall dual flag holder, BackOff LED license plate frame, "Rufus" (stuffed 20" Bulldog) real one wants nothing to do with bike. Honel tri bag for dash, recordingguy25's (SL handle) custom mud flap ( didn't want plain old square cut mud flap. Spyderpops critter gitter. Gremlin Bell
LED Lights from Hong Kong make me wonder where the actual manufacture of the individual lights are made?
Since HK was a British controlled territory for so many years, there are many English speaking people there. Not to mention so many other nationalities. It is a melting pot.
The story I get here in Vietnam is = LED lights made in Korea are by far much better than any where in S.E. Asia.
From there it all comes down to your Budget.
My Humble Opinion for what its worth.
If it Feels Good, Do It !!
Too Much Is Just Enough !
2011 RS~S Pure Magnesium / Black ~M~
Nice, but we have several venders here that have lights similar . Our venders here, will answer your call without an interpreter.
Unfortunately the vendors we have didn't have anything that would fit between trunk lid and base. I only had 0.18 inches to work with and all the vendors I checked with didn't have anything less than 5/16 inch ( too big for trunk to close properly/not waterproof) the ledlightsworld ones are waterproof/bright enough to be see when I step on brake. have been told by friends following me at night there's no doubt I am stopping as it seems the whole back of your bike lights up when you come to a stop sign.. Good choice for me..maybe not for everyone but I am impressed with them
2013 RT-S se5, C/D HMT third tail light( r/b/t), Ram Cup holder, TRICLED front fender LED's (r/t), C/D Bright sides (r/t), Bajaron sway bar and metal heim links, TRICLED mirror turn signal LED's, ISCI tall dual flag holder, BackOff LED license plate frame, "Rufus" (stuffed 20" Bulldog) real one wants nothing to do with bike. Honel tri bag for dash, recordingguy25's (SL handle) custom mud flap ( didn't want plain old square cut mud flap. Spyderpops critter gitter. Gremlin Bell
My tricleds that are on my 2013 RT and also the ones that were on my 2012 RT, are great, fit fine, trunk closes properly, and i got two sets of lights back there not one and ......... If there is a problem i can call Reggie and get it resolved, plus he is a paid sponsor of this great web site.
Did i mention that Reggie at Tricleds and others are sponsors that help pay for this FREE website that we enjoy???
Cruzr Joe
Sent from my iPad using Tapatalk HD
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
Finally got my LED's from ledlightsworld (Hong Kong) took 3 weeks to get here but now I m glad. They look nice going around trunk.
Nice setup. Glad you got what you needed.
It always amazes me how often you will be chastised for buying from non-sponsors. I myself can't afford the high prices that the sponsors charge. I have to save for any purchase that I make.
Unfortunately the vendors we have didn't have anything that would fit between trunk lid and base. I only had 0.18 inches to work with and all the vendors I checked with didn't have anything less than 5/16 inch ( too big for trunk to close properly/not waterproof) the ledlightsworld ones are waterproof/bright enough to be see when I step on brake. have been told by friends following me at night there's no doubt I am stopping as it seems the whole back of your bike lights up when you come to a stop sign.. Good choice for me..maybe not for everyone but I am impressed with them
Not sure what vendor you are refering to, but Tricled's fit just fine!_DSC2190.jpg
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
It always amazes me how often you will be chastised for buying from non-sponsors. I myself can't afford the high prices that the sponsors charge. I have to save for any purchase that I make.
I responded the way i did because the OP stated that the vendors products on here did not work ........... and that was incorrect.
I will stand up for or chastise vendors for their products as necessary when i am spending my money on something they make and advertise for sale.
Sorry that you felt like i was chastising him for his purchase, i was not, i was responding to his (as i think) remark concerning our good vendors products.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
It always amazes me how often you will be chastised for buying from non-sponsors. I myself can't afford the high prices that the sponsors charge. I have to save for any purchase that I make.
You have a valid point. However, these vendors have competitive prices and they usually will give you a nice deal. Most of us have made friends with them. If you can make the parts, good for you! But thanks to the vendors, we have this forum to share.
To add on Cruzr Joe's statement: Buying from non-sponsors is not a sin... we all do! But to come here to mention that the sponsors here do not deliver a certain item when they actually do... then, yes, we are going to defend them. And we have no problems getting reviews from non-sponsored items... but if the OP starts promoting them without moderator's consent, beware the banhammer!
Last edited by bullant12; 07-18-2013 at 09:57 AM.
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
You have a valid point. However, these vendors have competitive prices and they usually will give you a nice deal. Most of us have made friends with them. If you can make the parts, good for you! But thanks to the vendors, we have this forum to share.
To add on Cruzr Joe's statement: Buying from non-sponsors is not a sin... we all do! But to come here to mention that the sponsors here do not deliver a certain item when they actually do... then, yes, we are going to defend them. And we have no problems getting reviews from non-sponsored items... but if the OP starts promoting them without moderator's consent, beware the banhammer!
OUCH, NO, PLEASE NOT THE "BANHAMMER" THAT HURTS LIKE H..L
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer