-
Very Active Member
My " B" trip meter quit working/ how often should belt need alignment ?
I always use the B trip meter and reset at every fill up. The A one I use for total trip mileage. Well the B quit working. It seems to have a mind of its own, it will stay at 0 and sometimes it might start working. This is the only thing on the display that is malfunctioning. Does this mean the display will need to be replaced?
Question #2: How ofter does the belt alignment have to be done. I have done it myself about 3 thousand miles ago after having a tire installed (the belt was rubbing against the flange on the rear). Now it has moved a little and instead of the credit card gap it is more like a full nickel width from the flange. I have pulled the 622 trailer to spyderfest and back, about 1600 miles total and just got back from the outer banks with another round trip of about 1200 miles and noticed the gap is bigger. I have a total of 16,200 miles on the 2010 RTS. Is this normal for the belt to move a little over time and miles or would something more be going wrong?
Happy Spyderlovers
-
Very Active Member
-
Motorbike Professor
Originally Posted by akspyderman
Did you check to see if you accidently hit the pause button. Pause/resume is usually the cause here.
Exactly...if it says "Resume", it is paused.
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
Registered Users
It took me three tries to get that thing to work, I tried it myself, then went to monster.com and then had a professional do my résumé. I had no idea why the bike thought I needed one.
Corbin saddle
spyderpops block off plate, bump skid, belt guard
IPS
Tricled LED lights all around(too many to name here)
Smoothspyder belt tensioner
Custom Dynamics britesides
VTC floorboards, upper air vents, spoiler
BK car stuff HID upgrade
trailer hitch
Repainted rear fender, trunk latch assembly, switch cluster, gauge cluster
cell phone interface kit
travel cover that no longer fits due to the spoiler
New sway bar
New shock relocator
-
-
Very Active Member
Originally Posted by akspyderman
Did you check to see if you accidently hit the pause button. Pause/resume is usually the cause here.
didn't know it had a pause, gotta check that. thanks.
Happy Spyderlovers
-
working display functions
FIND YOURSELF A 12 YEAROLD THEY'll HAVE IT FIGURED OUT IN 2 MINUTES
-
Active Member
Forum
ST Shop Talk
My " B" trip meter quit working/ how often should belt need alignment ?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|