-
Registered Users
Filling the coolant reservoir
How in the world are we supposed to pour coolant into the reservoir? There is no room above the hole and even with a funnel the angle is so steep that my funnels wont work.
2013 Pure Magnesium Spyder RS-SM5 Cal Sci medium clear windshield, R-35 hard sided saddlebags and fitments rack, 2013 Can-Am Spyder ST Limited Embroidered Stock Seat, Trunk opening spring, fire extinguisher, Passenger backrest and rack, Added side mirrors, Handlebar bag.
-
Motorbike Professor
I use a long neck funnel. It is also easier if you remove the adjacent body panel.
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
Thinks out loud
Didn't have the proper type funnel the first time so I used one of the extension tubes off my small shop vac. Worked great. It's a military thing.....figure something out and gitterdone.
Identify what you have control over and find peace with what you don't.
-
Registered Users
Filling coolant
Get a small funnel and a 12" - 15" piece of fuel line hose. Push the hose on the end of the funnel and fish the other end into the over flow tank.
-
Active Member
I picked up a funnel with flex hose attached at my local Autozone. Nice thing is it has a twist on/off flow at the funnel base so you can fill the funnel then control what you add from the tube.
-
-
Very Active Member
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
-
Very Active Member
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
Very Active Member
Need a hose..!!
need a flexible hose of some kind at the end of a funnel. Make one, buy one or use your wife's baster...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
The best 2 suggestions, #2 and #5; have them both. Not so sure putting a hose at the end of the funnel would be a good idea; always that chance of it ending up in the reservoir.
-
Registered Users
-
Originally Posted by Jerbear
Didn't have the proper type funnel the first time so I used one of the extension tubes off my small shop vac. Worked great. It's a military thing.....figure something out and gitterdone.
HOOAH!
-
coolant reservior
I tried the "flexable hose" thing, but the hoses pinched and restricted the flow. So, I piddled around one day and used two pieces of 1/2" pvc pipe, about 4 in long, 1 piece about 2 in long and two 45 degree angles, attached a funnel to the "contraption" and it worked great. No need to remove all those panels.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|