GPS mount

[Green Machine]

I know this has been covered somewhere, but I can’t seem to find it. Does anyone know if there is a GPS mount that is compatible for a 2013 RSS?

[stormtrooper]

I bolted a Ram rubber ball to the black plastic cover that is behind the metal handle bar cover.Then you can add any Ram mount that you want to the rubber ram mount ball.I have the gps mount and have no problems even at highway speeds.Take the gps ram mount off the spyder and you have just a ball left that is not that noticeable.

[Littlebadwolf]

I bolted a Ram rubber ball to the black plastic cover that is behind the metal handle bar cover.Then you can add any Ram mount that you want to the rubber ram mount ball.I have the gps mount and have no problems even at highway speeds.Take the gps ram mount off the spyder and you have just a ball left that is not that noticeable.

I wouldn't use the mount that Can-Am sells for the GS/RS...Mine snapped in half while I was running down the road and I lost parts all over the highway....Thank God Firefly was with us and put his talent using 1,000 mile tape to piece it back together on my dash... Use ram mounts ,much more secure and they won't snap in half...

[Green Machine]

Thanks for the info. I will give it a shot.

[stormtrooper]

I wouldn't use the mount that Can-Am sells for the GS/RS...Mine snapped in half while I was running down the road and I lost parts all over the highway....Thank God Firefly was with us and put his talent using 1,000 mile tape to piece it back together on my dash... Use ram mounts ,much more secure and they won't snap in half...

mine is all Ram Mount products.That BRP Can Am one looks like a piece of LOL

[MikeinGA]

They have one in the accessories catalog http://store.spyder.brp.com/products/631112/SPYDER_RS

[rabtech]

They have one in the accessories catalog http://store.spyder.brp.com/products/631112/SPYDER_RS

That is a RAM mount. I noticed my Limited ST and RT came with a additional RAM mount in the box with the GPS. And this is a tough product. It is the standard 1" ball type.

[bonehead]

Try Reggie at TRIC-LED. I bought from him at SF, and it fits fine. fits over brake resavoir no issues.
http://tricled.com/TricLed.com/Home.html

[asp125]

Thanks to an idea someone had here. I got the RAM Xgrip mount with the Helibar install this weekend. It's on a 1" ball on the metal handlebar cover.

[smporter420]

Ram mount like these won't mount on the need bars ?

Sent from my SCH-R760 using Tapatalk 2

[Chupaca]

Take a ram handlebar mount discard the lower part. Bolt it to the plastic next to ignition. See pic below.

20130228_115811.jpg power cord if needed velcroed to the side..