-
-
I think there is one available but I have no idea where.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
Originally Posted by Bob Denman
...And I'm not sure if I want to try this one; but I've got to ask...
The "Missing" right-hand side grilles for the radiator outlets can be bought from quite a few of our supporting vendors.
They can even be found in Chrome!
Question: Does anybody offer a Chrome left-hand side grille to match them?
Spyderpops has the left and right hand stainless steel grills. these are mesh grills not block off plates, but can be used with the block off plate if you so desire.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Originally Posted by Cruzr Joe
Spyderpops has the left and right hand stainless steel grills. these are mesh grills not block off plates, but can be used with the block off plate if you so desire.
Cruzr Joe
If you want to go Chrome (or a metal-ish color), that would be the way to go.
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
-
Active Member
For your viewing pleasure.
The bottom right grill is new. SpyderPops didn't have them when I order the first sets. It's a nice finish to have all three.
Left Side Grills.jpg Right Side Grills.jpg
Left Side............Right Side
Kraig
2012 RT SE5
2010 RT-622 trailer
2013 Triump Bonneville T100
1971 Honda CT70
1972 Honda CT70H
-
Very Active Member
HiYa Bob !!
I put SpyderPops mesh grills in all 3 holes, right & left sides (on the right side, if you have the block off plates, the mesh will go right over them).
I love the look. I think they are pretty sharp !!!
:-) Cheap mod !!!
Tommy J.
Last edited by fireplug98; 05-09-2013 at 09:47 AM.
F3L SE5 Black -- F4 windshield w/wings, Reggie LED headlights, driving lights & Cyclops LED, Ultimate seat, Fox shocks, BajaRon swaybar, Lamont highway centerline pegs & 3rd peg, Lamont belt tensioner, K&N air filter, Baker air wings & cup holder, CanAm hitch.
-
Very Active Member
-
Very Active Member
-
-
Very Active Member
The Bling's The Thing!
For you Bob... BING is the thing!
Sent from my iPad using Tapatalk HD
Spyder #1 - 2008 GS SM5 Premier Edition #1977. RIP after 80,000 miles.
Spyder #2 - 2012 RT SM5. Traded in after 24,000 miles.
Spyder #3 - 2015 F3 SM6. Put 13,000 miles on and sold it.
Spyder #4 - 2017 F3 SM6. Too good of a deal to pass up!
-
Very Active Member
I like the ESI Cycle Product covers. I bought the black 'coffin' style to match the left side cover.
http://www.esicycleproducts.com/spyderrtventcovers.html
I really like these chrome ones, but they do not make a left side with the spider (web) design and my OCD says they need to match left & right.
http://www.esicycleproducts.com/rtlowersssmall.jpg
http://www.esicycleproducts.com/rtuppersssmall.jpg
-
-
Registered Users
vent covers
Hey Bob I have a suggestion. Put Baker air wings on and take your left vent cover off so you can easily check the oil. Problem solved!
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|