4 way flashers stop working

[baldeagle55]

Hey I have a 2011 Rt the 4 way flashers stop anybody can help me tell me what is wrong or to check

[SpyderAnn01]

Are your brake lights working? They are on the same fuse (on 2013 anyway). Are you getting any error codes?

[baldeagle55]

Are your brake lights working? They are on the same fuse (on 2013 anyway). Are you getting any error codes?

brake lights work no code

[Chupaca]

to make sure all lights are working, turn signals, brake lights, running lights then see if they flash when in reverse. If all that is working must be the switch..if they come on but don't flash you need to check the flasher unit... Let us know what you find....

[billybovine]

Good idea to see if they work in reverse. There is no flasher unit it is controlled by the instrument cluster.

[Bob Denman]

That emergency flasher switch just seems to sit in a spot where it catches all of whatever Mother Nature throws at you. Mine is also starting to get a bit wonky, so I'm going to try and take things apart , and clean out whatever has accumulated in there to gum up the works.

[bruiser]

RT flashers don't flash in reverse like the RS.

[wukka]

to make sure all lights are working, turn signals, brake lights, running lights then see if they flash when in reverse. If all that is working must be the switch..if they come on but don't flash you need to check the flasher unit... Let us know what you find....

Check my post on the Reverse switch...The hazard switch is the same way...give it a couple of short blasts of WD-40 and let it soak in. That may do the trick...