-
Active Member
I’M having some difficulty aligning my drive belt and tensioner the belt is "walking"
I’M having some difficulty aligning my drive belt and tensionerthe belt is "walking" off the left side of the pulley for the life of me I can’t seem to get it right Iwas a mechanic in the military for 6 years so I have some mechanical experienceif someone that was more mechanically inclined then myself could give me ashort tutorial I would be much appreciative
-
I can't offer you an help but just wanted to say hi and good luck with your belt.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Better check your front sprocket and output shaft for play. Also check the rear wheel and sprocket bearings.
-
Active Member
Originally Posted by NancysToy
Better check your front sprocket and output shaft for play. Also check the rear wheel and sprocket bearings.
thxs i'll give it a try
-
How far off is it walking?, The belt should not be right against the rear pulley flange.
Also it's normal for it to walk a little when backing up, Or when stopping after a sharp turn, ie, turning sharply into a spot then stopping. Once you move the Spyder 15 feet or more in a straight line it will walk back.
-
SpyderLovers Founder
-
Active Member
Last edited by bigsims330; 04-10-2013 at 10:16 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|